[PCB_FORUM] Re: SPB install with windows 64 bit OS.
- From: "David Kelly (davidkel)" <davidkel@xxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 21 Jan 2009 06:21:41 -0800
Hi
I had a 32bit version of Linux running on my machine and I found that
Allegro's all around performance was noticeably better than on XP. I now
have XP64 running on the same machine. It is not nearly as fast as the
Linux version. Go with Linux if you can. I would have stayed with it but
turns out that a Linux machine remote over the VPN is unusable.
Dave
David Kelly
davidkel@xxxxxxxxx
720-562-6316
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of joe tasker
Sent: Tuesday, January 20, 2009 11:00 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: SPB install with windows 64 bit OS.
Hi All ,
In reply to this, has anyone done performance comparisons with Allegro
running under
Linux verse Windows on 64 bit systems???.......thanks, joe
--- On Mon, 1/19/09, David Kelly (davidkel) <davidkel@xxxxxxxxx> wrote:
From: David Kelly (davidkel) <davidkel@xxxxxxxxx>
Subject: [PCB_FORUM] Re: SPB install with windows 64 bit OS.
To: icu-pcb-forum@xxxxxxxxxxxxx
Date: Monday, January 19, 2009, 6:37 PM
Hi
I have 15.7 up and running on XP64. I have had no issues. The install
went
smoothly as well. One thing I will say is I was disappointed in the
performance.
I was hoping it would be faster but if it is , not by much. Allegro is
still a 32 bit
application. Because of this it can't take advantage of the larger
memory space of
the 64 bit OS.
Dave
David Kelly
davidkel@xxxxxxxxx
720-562-6316
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Allan Nørgaard
Sent: Monday, January 19, 2009 6:27 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] SPB install with windows 64 bit OS.
Hi Everyone.
I want to here out there,
Is there anyone have tried to install Cadence SPB on Windows 64 Bit os
(XP/Vista). Will this run or will this give lot of problems.
I hope your will be abel to tell me this configuration.
Yours sincerely,
______________________________
Allan Nørgaard, CID
Hardware Engineer, PCB Design Manager
VELUX A/S
Accessories
Product Development Electronics
Bækgårdsvej 38
DK-6900 Skjern
Telephone office: +45 9735 3511
Telephone direct: +45 9980 6272
Office Fax: +45 9980 6260
@ allan.norgaard@xxxxxxxxx
www www.velux.com
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
