[PCB_FORUM] Re: SCALD to Concept HDL migration

 
This is supported under WinDoze as well.  We keep a copy of 13.5 on the
system for when this needs to be done (which is pretty rare now).
 
-- 
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice)     * 503-627-5587 (fax)
<http://www.tektronix.com/> 
http://www.tektronix.com     <http://www.pcb-designer.com/>
http://www.pcb-designer.com
 
"Off-Grid and Proud of it!"

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Ritter, Alan
Sent: Friday, March 07, 2008 10:40
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: SCALD to Concept HDL migration



This was supported under Unix back when the SCALD/HDL transition first
occurred at Allegro V13 or so.  I'm not sure the utilities to do so were
ever migrated to the Wintel platform.  It was a big hassle and involved
library as well as design conversion.

 

/s/jar (Alan Ritter, alan.ritter@xxxxxxxxxx)
        http://www.mtritter.org
  


  _____  


From: Dharma Kemp-Bresett [mailto:dharma@xxxxxxx] 
Sent: Friday, March 07, 2008 11:23 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] SCALD to Concept HDL migration

 

Hi Everyone,

 I know that there is a migration guide for bringing a SCALD schematic
in to concept HDL but I can't seem to find it! Can anyone forward me the
doc or point me in the right direction?

Thanks in advance,

Dharma

 

KAW/USA Ltd. 
39 Simon Street, #4 
Nashua, NH 03060 
603-886-8711 x212 
603-881-8763 fax 

Confidentiality Notice: This email and any accompanying documents
contain information that is confidential, privileged or exempt from
disclosure under applicable law and is intended for the exclusive use of
the addressee. This information is private and protected by law. If you
are not the intended recipient, or have received this email in error,
you are hereby notified that any disclosure, copying, distribution or
use of the contents of this document in any manner is strictly
prohibited.

 







EMAIL DISCLAIMER 



Please Note: The information contained in this message may be
privileged and 

confidential, protected from disclosure, and/or intended only for the
use of

the individual or entity named above. If the reader of this message is
not

the intended recipient, or an employee or agent responsible for
delivering

this message to the intended recipient, you are hereby notified that any

disclosure, distribution, copying or other dissemination of this

communication is strictly prohibited. If you received this communication
in

error, please immediately reply to the sender, delete the message and 

destroy all copies of it.



Thank You

Other related posts: