[PCB_FORUM] Re: RS274X, neg planes, import gerbers into Allegro

From: "Van Os, Richard (GE Healthcare)" <Richard.VanOs@xxxxxxxxxx>
To: <icu-pcb-forum@xxxxxxxxxxxxx>
Date: Fri, 25 Apr 2008 16:20:06 -0400

Gary
 
Are you using traces to contain or extrude your negative plane.  RS274X
needs to use the Anti Etch layer to split the plane.

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Friday, April 25, 2008 2:15 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] RS274X, neg planes, import gerbers into Allegro



Hey guys,

 

Allegro 15.5.1 and XP Pro

 

I am one of the hold-outs still using 274D (Gerber 6x00).

 

I also still create my planes as negative.

 

After creating my gerbers, I use an Allegro database to read in the
gerbers for checking.

 

When I create my artwork using RS274X, then import the gerbers into an
Allegro database, the negative planes look very weird.

The plane splits are not right and the plane outline is also FUBAR!

 

In the Global Dynamic Shape Parameters form, I have the Artwork format
set to Gerber RS274X under the Void controls tab.

 

Anyone know what's going on with this and how to get RS274X negative
plane gerbers to read correctly into an Allegro database?

 

Thanks for any help!

 

Regards,

Gary

 

 

 

  

Gary E. MacIndoe
PCB Design Engineer
Fort Collins, Colorado

amd.com

gary.macindoe@xxxxxxx

Follow-Ups:

[PCB_FORUM] Re: RS274X, neg planes, import gerbers into Allegro
From: Macindoe, Gary

References:
- [PCB_FORUM] RS274X, neg planes, import gerbers into Allegro
  - From: Macindoe, Gary

[PCB_FORUM] Re: RS274X, neg planes, import gerbers into Allegro

Other related posts: