What is your need? Having smd pads rounded? So you have to redefine your padsatck, creating it with oblong rather than rectangle. Jean-Charles TEYSSIER -------- Message d'origine-------- De: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] Date: jeu. 28/09/2006 11:51 À: icu-pcb-forum@xxxxxxxxxxxxx Objet : [PCB_FORUM] ?????: Re: IDF import to PROE Hello and thanks ahead ; is there a way to make pads as rounded rectangular ( round corners) ... more and more customers are asking for this......... please help.. -----????? ??????----- ???: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] ??? Eileen Ong ????: Thursday, September 28, 2006 5:34 AM ??: icu-pcb-forum@xxxxxxxxxxxxx ????: dalocke2@xxxxxxxxxxx ????: [PCB_FORUM] Re: IDF import to PROE Hi all, Yes, it is in continuous line. This BRD use to be able to be imported into the PROE. But after numerous changes on the schematic, I want to do a final check on the placement but Mechanical just could not import in the emp/emn files. Puzzle?? Best regards, Eileen -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of dalocke2@xxxxxxxxxxx Sent: Thursday, September 28, 2006 10:46 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: IDF import to PROE Make sure the board outline is one continous line. ProE will not work if it is in segments. -------------- Original message ---------------------- From: "Eileen Ong" <eileen.ong@xxxxxxxxxxxxxx> > Hi all, > > > > I have generated a IDF file for PROE to import to check on the placement. > Problem is the mechanical is able to import the emn/emp files for IDF > generated from one of the BRD file but on another BRD file.The > mechanical can't open the emn/emp files. It always prompt them to > correct part geometry with Sketcher. Any one got any clue how to resolve this? > > > > > > > > Thanks in advance for help. > > Best regards, > Eileen > ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------