[PCB_FORUM] Re: Quick way to slide vertex/segments/etc?

Success! Derive Connectivity works now, but I had to disable dynamic shapes first.
Thanks to all for your help.
-----Original Message-----
From: Jean Bratton
Sent: Apr 12, 2011 3:47 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Quick way to slide vertex/segments/etc?

Another possibility…assuming you have a cline endpoint that you want to connect to the center of a pad that’s, say, 20 mils away, add a cline that’s 20 mils long offset by some amount outside the pad, and then copy it to each pad location…it might be quicker than moving the vertex.

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of ameehan@xxxxxxxxxxxxxx
Sent: Tuesday, April 12, 2011 6:32 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Quick way to slide vertex/segments/etc?

 

Thanks Andrew. Yes, we want the end points to move to the new center points of the pins that were moved. Derive Connectivity did not do that for us. We're going to try your suggestion of moving by group and see how that works.

-----Original Message-----
From: "Andrew Noonan (annoonan)"
Sent: Apr 12, 2011 1:10 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Quick way to slide vertex/segments/etc?


----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------


This correspondence and any attachments are considered confidential. If you are not the intended recipient, please notify Freedom CAD Services, Inc. immediately by either replying to this message or by sending an email to operations@xxxxxxxxxxxxxx; please destroy all copies of this message and any attachments. Thank you.
----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------

Other related posts: