[PCB_FORUM] Re: Question regarding the netlength.il skill file

 
Is there already a file in the directory named "test.form"?  If so, try
deleting it.
 
The first thing the program does is try to write this file so it can
create the form.  If the file will not create, it doesn't assign the
port for the various fprintf to output to, causing the error...
 
-- 
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice)     * 503-627-5587 (fax)
<http://www.tektronix.com/> 
http://www.tektronix.com     <http://www.pcb-designer.com/>
http://www.pcb-designer.com
 
"Off-Grid and Proud of it!"

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu seiji
Sent: Friday, February 09, 2007 13:23
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Question regarding the netlength.il skill file



I am running it in a writable directory.

I have looked for the line that was suggested on the message Mitch
posted, but I had no luck finding the line.  I tried loading
"drc_walk.il" to see if it would give me the same error but
"drc_walk.il" works just fine.  Does anyone else have problems with the
netlength.il?  And if you don't then is it worth trying to get it
working?  Thank you all in advance.




  _____  

From: <george.h.patrick@xxxxxxxxxxxxxx>
Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
To: <icu-pcb-forum@xxxxxxxxxxxxx>
Subject: [PCB_FORUM] Re: Question regarding the netlength.il skill file
Date: Fri, 9 Feb 2007 12:50:29 -0800


 
Are you running it in a directory you can write to?
 

-- 
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice)     * 503-627-5587 (fax)
<http://www.tektronix.com/> 
http://www.tektronix.com     <http://www.pcb-designer.com/>
http://www.pcb-designer.com
 
"Off-Grid and Proud of it!"

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu seiji
Sent: Thursday, February 08, 2007 16:24
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Question regarding the netlength.il skill file



I loaded it in the illinit file and it is being loaded, but still run
into the same error.  I am running Allegro expert and not the studio
version.  Does anyone have any more ideas?




  _____  

From:  gnieski_mike@xxxxxxx
Reply-To:  icu-pcb-forum@xxxxxxxxxxxxx
To:  <icu-pcb-forum@xxxxxxxxxxxxx>
Subject:  [PCB_FORUM] Re: IDF IN problem
Date:  Thu, 8 Feb 2007 08:22:29 -0500
>15.5.1
>
>
>-----Original Message-----
>From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
>[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Shahed
>Safavi-Bayat
>Sent: Thursday, February 08, 2007 8:18 AM
>To: icu-pcb-forum@xxxxxxxxxxxxx
>Subject: [PCB_FORUM] Re: IDF IN problem
>
>What Version of Allegro you are using? Is it 15.7?
>
>
>Shahed
>
>
>-----Original Message-----
>From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
>[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of
>gnieski_mike@xxxxxxx
>Sent: Thursday, February 08, 2007 6:41 AM
>To: icu-pcb-forum@xxxxxxxxxxxxx
>Subject: [PCB_FORUM] IDF IN problem
>
>
> This is for anyone that uses Import-idf in Allegro. Presently we
>import idf placement and board outline
> data from SolidWorks. I'd like to see if anyone has seen a
>problem reading in placement files and having
> components NOT move if the mechanical data wants it to? We have
>a board with two LED's placed using
> the wrong orientation, the lens of the LED facing inboard. The
>orientation and origin of the part both agree
> in the mech model and in the Allegro footprint. After reading
>the .emn file into the board to see if it corrects
> the orientation of the LED it DOES NOT not move, still facing
>inboard. If I manually move the part a few mils away
> or delete the part and re-read the same identical .emn file into
>the board it places the part in the proper
> location and proper orientation facing outboard. I'm not quite
>sure at what point the inboard orientation happened
> and don't understand why reading in the same .emn file results
>in two different orientations. After looking at
> the .emn file we noticed that the orientation of the part is at
>-90.....As Allegro always show deg in positive
> increments is it possible that this could be a problem? Has
>anyone else seen this happen?
>
> thanks,
>
> Mike Gnieski
> EMC2 Corporation
> Hopkinton, MA
>
>-----------------------------------------------------------
>To subscribe/unsubscribe:
>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>with a subject of subscribe or unsubscribe
>
>To view the archives of this list go to
>http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or Questions:
>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>-----------------------------------------------------------
>-----------------------------------------------------------
>To subscribe/unsubscribe:
>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>with a subject of subscribe or unsubscribe
>
>To view the archives of this list go to
>http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or Questions:
>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>-----------------------------------------------------------
>
>-----------------------------------------------------------
>To subscribe/unsubscribe:
>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>with a subject of subscribe or unsubscribe
>
>To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or Questions:
>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>-----------------------------------------------------------


----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
----------------------------------------------------------- 


----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: