[PCB_FORUM] Re: Question regarding the netlength.il skill file

I am running it in a writable directory.

I have looked for the line that was suggested on the message Mitch posted, but I had no luck finding the line.  I tried loading "drc_walk.il" to see if it would give me the same error but "drc_walk.il" works just fine.  Does anyone else have problems with the netlength.il?  And if you don't then is it worth trying to get it working?  Thank you all in advance.

---

From: <george.h.patrick@xxxxxxxxxxxxxx>
Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
To: <icu-pcb-forum@xxxxxxxxxxxxx>
Subject: [PCB_FORUM] Re: Question regarding the netlength.il skill file
Date: Fri, 9 Feb 2007 12:50:29 -0800

 

Are you running it in a directory you can write to?

 

--
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support

P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
ナ 503-627-5272 (voice)     ニ 503-627-5587 (fax)
http://www.tektronix.com    http://www.pcb-designer.com

 

"Off-Grid and Proud of it!"

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu seiji
Sent: Thursday, February 08, 2007 16:24
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Question regarding the netlength.il skill file

I loaded it in the illinit file and it is being loaded, but still run into the same error.  I am running Allegro expert and not the studio version.  Does anyone have any more ideas?

---

From:  gnieski_mike@xxxxxxx
Reply-To:  icu-pcb-forum@xxxxxxxxxxxxx
To:  <icu-pcb-forum@xxxxxxxxxxxxx>
Subject:  [PCB_FORUM] Re: IDF IN problem
Date:  Thu, 8 Feb 2007 08:22:29 -0500
>15.5.1
>
>
>-----Original Message-----
>From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
>[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Shahed
>Safavi-Bayat
>Sent: Thursday, February 08, 2007 8:18 AM
>To: icu-pcb-forum@xxxxxxxxxxxxx
>Subject: [PCB_FORUM] Re: IDF IN problem
>
>What Version of Allegro you are using? Is it 15.7?
>
>
>Shahed
>
>
>-----Original Message-----
>From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
>[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of
>gnieski_mike@xxxxxxx
>Sent: Thursday, February 08, 2007 6:41 AM
>To: icu-pcb-forum@xxxxxxxxxxxxx
>Subject: [PCB_FORUM] IDF IN problem
>
>
> This is for anyone that uses Import-idf in Allegro. Presently we
>import idf placement and board outline
> data from SolidWorks. I'd like to see if anyone has seen a
>problem reading in placement files and having
> components NOT move if the mechanical data wants it to? We have
>a board with two LED's placed using
> the wrong orientation, the lens of the LED facing inboard. The
>orientation and origin of the part both agree
> in the mech model and in the Allegro footprint. After reading
>the .emn file into the board to see if it corrects
> the orientation of the LED it DOES NOT not move, still facing
>inboard. If I manually move the part a few mils away
> or delete the part and re-read the same identical .emn file into
>the board it places the part in the proper
> location and proper orientation facing outboard. I'm not quite
>sure at what point the inboard orientation happened
> and don't understand why reading in the same .emn file results
>in two different orientations. After looking at
> the .emn file we noticed that the orientation of the part is at
>-90.....As Allegro always show deg in positive
> increments is it possible that this could be a problem? Has
>anyone else seen this happen?
>
> thanks,
>
> Mike Gnieski
> EMC2 Corporation
> Hopkinton, MA
>
>-----------------------------------------------------------
>To subscribe/unsubscribe:
>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>with a subject of subscribe or unsubscribe
>
>To view the archives of this list go to
>http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or Questions:
>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>-----------------------------------------------------------
>-----------------------------------------------------------
>To subscribe/unsubscribe:
>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>with a subject of subscribe or unsubscribe
>
>To view the archives of this list go to
>http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or Questions:
>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>-----------------------------------------------------------
>
>-----------------------------------------------------------
>To subscribe/unsubscribe:
>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>with a subject of subscribe or unsubscribe
>
>To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or Questions:
>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>-----------------------------------------------------------

----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------

All trademarks and copyrights within the FreeLists archives are owned by their respective owners. Everything else ©2000-2009 Avenir Technologies, LLC. FreeLists is a service of Avenir Technologies, LLC.