[PCB_FORUM] Re: Question regarding the netlength.il skill file

They do work with Allegro Studio and even with Allegro in orcad demo mode (15.7). I think the limitation is that they need to loaded at startup. 

regards,
Robert

sjchar3@xxxxxxxxxxxx wrote:
I don't think the skill files work with the basic allergro studio tool. You may need to upgrade. I think this is still true. Sam -----Original Message----- 
From: arimitsus@xxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Wed, 7 Feb 2007 12:28 PM
Subject: [PCB_FORUM] Question regarding the netlength.il skill file

Hello once again.
I was trying to test out the netlength.il skill file but when I load the .il file and run the command (det) it gives me the error below. E- *Error* fprintf: argument #1 should be an I/O port (type template = "ptg") - nil I have tried running it on both Version 14 and 15 and I have had no luck. Does anyone else get this error? Has anyone found solution for this? Please let me know if anyone has had this problem. 
Thank you,
Seiji

    ------------------------------------------------------------------------
    From: /"Soledad Attia" <SAttia@xxxxxxxxxxxxxx
    <javascript:parent.ComposeTo("SAttia%40printronix.com", "");>>/
    Reply-To: /icu-pcb-forum@xxxxxxxxxxxxx
    <javascript:parent.ComposeTo("icu-pcb-forum%40freelists.org", "");>/
    To: /<icu-pcb-forum@xxxxxxxxxxxxx
    <javascript:parent.ComposeTo("icu-pcb-forum%40freelists.org", "");>>/
    Subject: /[PCB_FORUM] Re: Is it possible to down rev from version
    15-->14-->13?/
    Date: /Wed, 7 Feb 2007 09:04:21 -0800/

    Hi Seiji
You can’t go down a version once is saved using the higher version. 
     you will need To keep it at version 13.6.
I can’t think of another way to do it Good luck Soledad Attia ------------------------------------------------------------------------ 
    *From:* icu-pcb-forum-bounce@xxxxxxxxxxxxx
    <javascript:parent.ComposeTo("icu-pcb-forum-bounce%40freelists.org",
    "");> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx
    <javascript:parent.ComposeTo("icu-pcb-forum-bounce%40freelists.org",
    "");>] *On Behalf Of *arimitsu seiji
    *Sent:* Wednesday, February 07, 2007 8:51 AM
    *To:* icu-pcb-forum@xxxxxxxxxxxxx
    <javascript:parent.ComposeTo("icu-pcb-forum%40freelists.org", "");>
    *Subject:* [PCB_FORUM] Is it possible to down rev from version
    15-->14-->13?
Hi all, It seems like I can’t stop running into trouble these days :) Lets say I have a customer using Version 13.6 and we no longer have it installed. I currently have access to Version 14 and 15. Is it possible to use one of these versions and down rev the data 
    down back to 13.6 after we are done with routing.  We need to keep
    it at 13.6 for customer purpose.  I thought about just importing
    and exporting subdrawing but I remember it having some issues in
    the past and it is a pretty dense board so I'm afraid I might miss
    something.
If anyone have any idea/suggestions please let me know. Thank you, 
    Seiji
    ----------------------------------------------------------- To
    subscribe/unsubscribe: Send a message to
    icu-pcb-forum-request@xxxxxxxxxxxxx
    <javascript:parent.ComposeTo("icu-pcb-forum-request%40freelists.org",
    "");> with a subject of subscribe or unsubscribe To view the
    archives of this list go to
    http://www.freelists.org/archives/icu-pcb-forum/ Problems or
    Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
    <javascript:parent.ComposeTo("icu-pcb-forum-admins%40freelists.org",
    "");> -----------------------------------------------------------
----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx <javascript:parent.ComposeTo("icu-pcb-forum-request%40freelists.org", "");> with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx <javascript:parent.ComposeTo("icu-pcb-forum-admins%40freelists.org", "");> ----------------------------------------------------------- 
------------------------------------------------------------------------
*Check Out the new free AIM(R) Mail* <http://pr.atwola.com/promoclk/100122638x1081283466x1074645346/aol?redir=http%3A%2F%2Fwww%2Eaim%2Ecom%2Ffun%2Fmail%2F> -- 2 GB of storage and industry-leading spam and email virus protection. 


-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: