[PCB_FORUM] Re: Putting the cross section chart onto the fab drawing

I actually never thought of it before but if you  run the parallel
command it will create a file *.pll at the top of this text file is the
cross-section information. you could cut this out and use import text
file to add it to your  fab drawing. don't know a of any automated
method.
 
Gerry
Layers :

MATERIAL THICKNESS SUBCLASS NAME SHIELD EXAMINED

AIR 0

COPPER 0.06096 TOP No Yes

FR-4 0.08763

COPPER 0.03302 PWR_L2 Yes Yes

FR-4 0.2032

COPPER 0.03302 GND_L3 Yes Yes

FR-4 0.08763

COPPER 0.01651 SIG4_H No Yes

FR-4 0.203

COPPER 0.01651 PWR_L5 Yes Yes

FR-4 0.08763

COPPER 0.03048 SIG6_H No Yes

FR-4 0.08763

COPPER 0.03302 SIG7_V No Yes

FR-4 0.08763

COPPER 0.01651 GND_L8 Yes Yes

FR-4 0.203

COPPER 0.01651 SIG9_V No Yes

FR-4 0.08763

COPPER 0.03302 GND_L10 Yes Yes

FR-4 0.08763

COPPER 0.03302 PWR_L11 Yes Yes

FR-4 0.08763

COPPER 0.06096 BOTTOM No Yes

AIR 0

Gerry Meier

Sr. PCB Designer

Freedom CAD Services, Inc.

Voice: (603) 864-1300 x1350

AL Voice: (256) 417-6944

Email: gerry.meier@xxxxxxxxxxxxxx

Visit us at www.freedomcad.com <http://www.freedomcad.com/> 

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
toswanstrum@xxxxxxxxxx
Sent: Thursday, October 26, 2006 4:34 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Putting the cross section chart onto the fab
drawing



Is there any way to easily put the information located in the cross
section chart into a detail on the fab drawing in an automatic way?

Thanks 

Tom

Other related posts: