[PCB_FORUM] Re: Propagation Rules driven from Schematic to Allegro

Dale,

 

I would use the phase tolerance ( Diffp_Phase_Tol) on the diff pairs P/N
nets and a Rel prop on the group

 

Note: I have found it helpful to add the rule in Allegro and export
netlist with Properties to get the correct syntax if you are not sure. I
don't know what version you are using this may not work on some of the
later versions 

 

Gerry

 

Gerry Meier, Sr. PCB Designer

Freedom CAD Services. Inc

Voice: (256)776-7470 or (603) 864-1350

Email:gerry.meier@xxxxxxxxxxxxxx

visit us at http://www.freedomcad.com

 

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dale Rasmusen
Sent: Friday, April 25, 2008 1:55 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Propagation Rules driven from Schematic to Allegro

 

Hi all, I was wondering how to do the following...  

 

I have diff pairs that need to have REL_PROP_DELAY GRP:G:L:S::25
properties between P and N signals.. but I also want to place 20 of
these pairs in a group that must adhere to a PROP_DELAY of
L:S:1000:2000.

 

Thus I have P and N constraints as well as a group prop delay
constraint.

 

I'm not sure how to structure these rules for Allegro.  Your help is
appreciated.

 

Thanks,

 

 

Dale Rasmusen

CAD Manager

TEKNOVUS

(707) 665-0400 ext 133

(707) 665-0491 fax

Other related posts: