Andy, Keith, The env vars didn't do it either. I use mainly the Solaris version of Allegro. Just for fun I opened the database in Windows. The delay seems to report correctly there. I thought I had lost my mind. Seems to be reproducible from OS to OS. Currently, I'm downloading the latest and greatest Solaris with hotfixes. I was using the 10/24/2004 version. Cadence has a 11/18/2004 with 12/21/2004 hot fix. I'll report back and see if the problem is really software related. Arrgh, Thanks for your help. Dave -----Original Message----- From: Andy_Kulik@xxxxxxx Sent: Mar 14, 2005 9:56 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Prop Delay - Analysis Failed That is really odd. Did the env vars Keith posted help. didn't know about those...... Dave Seymour Sent by: 03/14/2005 09:49 AM Please respond to icu-pcb-forum@xxxxxxxxxxxxx To icu-pcb-forum@xxxxxxxxxxxxx cc Subject [PCB_FORUM] Re: Prop Delay - Analysis Failed Andy, That would be cool, except the net is routed according to the "i" button... Pin Type SigNoise Model --- ---- -------------- RP3008.5 BI CDSDefaultIO U11.J25 BI CDSDefaultIO No connections remaining Properties attached to net PROPAGATION_DELAY = L:S:2655 MIL:2660 MIL Any other ideas? dave -----Original Message----- From: Andy_Kulik@xxxxxxx Sent: Mar 14, 2005 9:38 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Prop Delay - Analysis Failed If the net is not fully routed the box will stay yellow. Cm should tell you that at the very bottom bar of the UI. To enable unrouted drc mode go to the Analyze Menu in CM and select Analysis Modes. In the Options tab of the resulting UI select the according checkboxes. ;-) Andy Dave Seymour Sent by: 03/14/2005 09:26 AM Please respond to icu-pcb-forum@xxxxxxxxxxxxx To icu-pcb-forum@xxxxxxxxxxxxx cc Subject [PCB_FORUM] Prop Delay - Analysis Failed On 15.2 I have a net with the PROPAGATION_DELAY set. The electrial constraints form button is "on". In the CM spreadsheet, The cell is yellow and reports that the Analysis failed. What are the reasons that the Analysis could fail? Is there something else to setup? Thanks dave LISTING: 1 element(s) < NET > Net Name: PB_MDQS1 Via Count: 2 Total Etch Length: 2625.77 MIL Total Manhattan Length: 2023.08 MIL Percent Manhattan: 129.79% Pin Type SigNoise Model --- ---- -------------- RP3008.5 BI CDSDefaultIO U11.J25 BI CDSDefaultIO No connections remaining Properties attached to net PROPAGATION_DELAY = L:S:2655 MIL:2660 MIL Electrical Constraints assigned to net prop delay: from L to S min=2655 MIL max=2660 MIL ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------