[PCB_FORUM] Re: Power PCB 5.0.1 data base converter to Allegro

Hi all,
I sincerely thank who all have given inputs.

regards
Sumathi



________________________________
From: Austin Franklin <allegrolist@xxxxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Friday, 31 July, 2009 1:21:06 AM
Subject: [PCB_FORUM] Re: Power PCB 5.0.1 data base converter to Allegro

Hi Jim,

> First you must export the PADS files in ascii version 3.5.

I have PADS2005SP1 and Allegro 15.7.  I have just done an ASCII out, with
the default format which is PADS 2005.0.... and have no problems with 15.7
reading it in.

Regards,

Austin
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------



      Looking for local information? Find it on Yahoo! Local 
http://in.local.yahoo.com/

Other related posts: