[PCB_FORUM] Pin swapping

 
Group,

  We are trying to come up with an easy way to swap pins between several
resistor network packages. So far we can swap pins within the packages
themselves, but not amongst the other packages. One thing that should work
is to make every individual pin a function, but that is a lot of work for
the engineer. There should be a way to define the library part to be
swapable and place several of them in the schematic and then swap them at
the allegro level. This is basic CAD functionality that has been around
since the early CAD tools of the 70's.

We are using Orcad version 15.7  with Allegro 15.5

Thanks,

  Tim Schillberg
KAW/USa


-------------------------------------------------
KAW USA, LTD.    "Real People .... Real Solutions" " Technology one
connection at a Time"


-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: