[PCB_FORUM] Re: Pick and Place output from Allegro...

Hi Austin,
You can try exporting the placement file.
It also gives the desired data for pick and place also it has option of
selecting the following placement origin:
1) Symbol origin
2) Body Center
3) Pin 1

Regards,
Poojan Garg,
Design Engineer,
Doon Hills EDS (P) Ltd.
Dehradun.
Ph:- 0135-2733005,09319853233
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Tuesday, August 26, 2008 10:10 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Pick and Place output from Allegro...

Hi Tripp,

Thanks.  No option for any format...only origin.  I guess I output this, and
give it to the assembly house and they massage it into the format their
machine needs...

Regards,

Austin


> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Tripp Tucker
> Sent: Tuesday, August 26, 2008 12:35 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Pick and Place output from Allegro...
>
>
> File Export Placement
>
> Tripp
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
> Sent: Tuesday, August 26, 2008 12:28 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Pick and Place output from Allegro...
>
> Hi,
>
> How do I get pick-and-place output from Allegro?  With PADS, I can get
> direct P&P machine files, but I can't find anything in Allegro that does
> that.  Any suggestions?
>
> Regards,
>
> Austin
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------


-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: