[PCB_FORUM] Re: Pick and Place output from Allegro...

I have been using 'File -> Export -> ODB++'...

From what I understand, the file(s) that are produced here contain 
pick-and-place information, as well as many other items required by both PCB 
Fab Houses and PCB assembly houses.

They will need the Valor package to extract / use this information.


Danny

  From: Gerry Meier 
  To: icu-pcb-forum@xxxxxxxxxxxxx 
  Sent: Tuesday, August 26, 2008 12:47 PM
  Subject: [PCB_FORUM] Re: Pick and Place output from Allegro...


  Under tools > reports - Try this one

   



   

  Gerry Meier, Sr. PCB Designer

  Freedom CAD Services. Inc

  Voice: (256)776-7470 or (603) 864-1350

  Email:gerry.meier@xxxxxxxxxxxxxx

  visit us at http://www.freedomcad.com

   

   

   

  -----Original Message-----
  From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
  Sent: Tuesday, August 26, 2008 11:40 AM
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Subject: [PCB_FORUM] Re: Pick and Place output from Allegro...

   

  Hi Tripp,

   

  Thanks.  No option for any format...only origin.  I guess I output this, and

  give it to the assembly house and they massage it into the format their

  machine needs...

   

  Regards,

   

  Austin

   

   

  > -----Original Message-----

  > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx

  > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Tripp Tucker

  > Sent: Tuesday, August 26, 2008 12:35 PM

  > To: icu-pcb-forum@xxxxxxxxxxxxx

  > Subject: [PCB_FORUM] Re: Pick and Place output from Allegro...

  > 

  > 

  > File Export Placement

  > 

  > Tripp

  > -----Original Message-----

  > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx

  > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin

  > Sent: Tuesday, August 26, 2008 12:28 PM

  > To: icu-pcb-forum@xxxxxxxxxxxxx

  > Subject: [PCB_FORUM] Pick and Place output from Allegro...

  > 

  > Hi,

  > 

  > How do I get pick-and-place output from Allegro?  With PADS, I can get

  > direct P&P machine files, but I can't find anything in Allegro that does

  > that.  Any suggestions?

  > 

  > Regards,

  > 

  > Austin

  > 

  > -----------------------------------------------------------

  > To subscribe/unsubscribe:

  > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx

  > with a subject of subscribe or unsubscribe

  > 

  > To view the archives of this list go to

  > http://www.freelists.org/archives/icu-pcb-forum/

  > 

  > Problems or Questions:

  > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

  > -----------------------------------------------------------

  > 

  > -----------------------------------------------------------

  > To subscribe/unsubscribe:

  > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx

  > with a subject of subscribe or unsubscribe

  > 

  > To view the archives of this list go to

  > http://www.freelists.org/archives/icu-pcb-forum/

  > 

  > Problems or Questions:

  > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

  > -----------------------------------------------------------

  > 

   

  -----------------------------------------------------------

  To subscribe/unsubscribe: 

  Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx

  with a subject of subscribe or unsubscribe

   

  To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

   

  Problems or Questions:

  Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

  -----------------------------------------------------------

JPEG image

Other related posts: