[PCB_FORUM] Re: P-cad to Allegro

Hello 

E-studio from Elgris can be used for PCAD ( PDIF)
schematic transfers to ConceptHDL. 

Regards
--- FranciscoMontoya@xxxxxxxxxxxxxxx wrote:

> Zafar,
> 
> If its the DOS-based PCAD Master Designer, you'll
> need to create the .pdf 
> file, then use the Import-PCAD feature.
> 
> The import only works for PCB files. As for the
> schematics, you're still 
> stuck on the PCAD side, unless you'll have to redo
> it on Cadence.
> 
> regards
> bambam
> 
> J. Francisco D. Montoya
> Group Supervisor
> PCB Design Group
> 
> Astec International Limited
> 4/F Technoplaza One
> 18 Orchard Road, Eastwood City 
> Libis, Quezon City
> Philippines 1110
> Phone: (632) 995-4000 loc 4438
> Email: franciscomontoya@xxxxxxxxxxxxxxx
> 
> 
> 
> 
> 
> "Zafar Bhatti" <zbhatti@xxxxxxxxxxxxxxxx> 
> Sent by: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> 08/16/2006 05:25 AM
> Please respond to
> icu-pcb-forum@xxxxxxxxxxxxx
> 
> 
> To
> <icu-pcb-forum@xxxxxxxxxxxxx>
> cc
> 
> Subject
> [PCB_FORUM]  P-cad to Allegro
> 
> 
> 
> 
> 
> 
>  
> Hi All,
>  
> Is there a way to convert P-CAD pcb file into
> Allegro brd file.
>  
> Zafar Bhatti
> Design Engineer
> Whizz Systems Inc.
> Office:(408) 980-0400 Ext. 112
> zbhatti@xxxxxxxxxxxxxxxx
>  
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: