[PCB_FORUM] Re: P-cad to Allegro

Zafar,

If its the DOS-based PCAD Master Designer, you'll need to create the .pdf 
file, then use the Import-PCAD feature.

The import only works for PCB files. As for the schematics, you're still 
stuck on the PCAD side, unless you'll have to redo it on Cadence.

regards
bambam

J. Francisco D. Montoya
Group Supervisor
PCB Design Group

Astec International Limited
4/F Technoplaza One
18 Orchard Road, Eastwood City 
Libis, Quezon City
Philippines 1110
Phone: (632) 995-4000 loc 4438
Email: franciscomontoya@xxxxxxxxxxxxxxx





"Zafar Bhatti" <zbhatti@xxxxxxxxxxxxxxxx> 
Sent by: icu-pcb-forum-bounce@xxxxxxxxxxxxx
08/16/2006 05:25 AM
Please respond to
icu-pcb-forum@xxxxxxxxxxxxx


To
<icu-pcb-forum@xxxxxxxxxxxxx>
cc

Subject
[PCB_FORUM]  P-cad to Allegro






 
Hi All,
 
Is there a way to convert P-CAD pcb file into Allegro brd file.
 
Zafar Bhatti
Design Engineer
Whizz Systems Inc.
Office:(408) 980-0400 Ext. 112
zbhatti@xxxxxxxxxxxxxxxx

Other related posts: