[PCB_FORUM] Re: PPT Query

Peter,

I don't know of anyway to do it within the tool today.  We have asked
for this for many years.  I think a solution is in the works.  As a
workaround, we add an injected property to the ppt that specifies what
body versions are legal for the selected row.

Hope this helps.

Regards,
Charlie
321.727.6235

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Peter Hughes
Sent: Tuesday, November 28, 2006 5:51 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] PPT Query

Hi All,

I want to pick a pack type in a part table and automatically the
specified version is attached to my cursor. Is there any way of doing
this in Concept.

Rgrds
 
Peter Hughes,
PCB Designer,
Concurrent Technologies,
4 Gilberd Close,
Newcomen Way,
Colchester,
Essex,
CO4 4WN.
Tel: +44 1206 752626
Fax: +44 1206 751116
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: