[PCB_FORUM] Re: PC equivalent of UNIX command DIFF

Yes my good friend Edward... That will work as well.
 
Chuck

  _____  

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Nease, Ellis E (Ed)
Sent: Saturday, February 24, 2007 9:10 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: PC equivalent of UNIX command DIFF


You can also try CSDiff
 
Ed

  _____  

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma Kemp-Bresett
Sent: Friday, February 23, 2007 5:46 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: PC equivalent of UNIX command DIFF


Hi Chad, 
That sounds particularly handy, I will give that a try as well....
Thanks,
Dharma

KAW/USA Ltd. 
39 Simon Street, #4 
Nashua, NH 03060 
603-886-8711 x212 
603-881-8763 fax 

Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.

 

  _____  

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Chad Saathoff
Sent: Friday, February 23, 2007 5:32 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: PC equivalent of UNIX command DIFF


comp should work on the PC.  Type "help comp" in a DOS window for usage.
 
An even better option is to download UNIX commands for use in Windows.
Search for cygwin on the internet.  It is free and you get your favorite
UNIX commands in Windows.

Chad

 


  _____  

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma Kemp-Bresett
Sent: Friday, February 23, 2007 4:21 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] PC equivalent of UNIX command DIFF
Importance: High


Hello Everyone,
I am hoping someone out there has the answer to this one. We need it to be
able to progress a design forward in a "timely" manner. We nee to know if
there is a PC equivalent to the UNIX command DIFF. This would be for the
purpose of comparing 2 files and creating a third with the differences.
Thanks in advance,
Dharma
 

KAW/USA Ltd. 
39 Simon Street, #4 
Nashua, NH 03060 
603-886-8711 x212 
603-881-8763 fax 

Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.

Other related posts: