[PCB_FORUM] Re: OrCAD CIS issue... Junction Dots.

Hi Gene,
 I know that way back when with concept you had to change the dpi setting
when printing or else the junction dots would print at almost dime size on
the PDF is that the issue you are seeing?
Thanks,
Dharma
 

KAW/USA Ltd. 
39 Simon Street, #4 
Nashua, NH 03060 
603-886-8711 x212 
603-881-8763 fax 

Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.

 

  _____  

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gene Carman
Sent: Monday, November 12, 2007 4:40 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] OrCAD CIS issue... Junction Dots. 



Apparently the help file says there is no way to change the Junction Dot
size.  The Junction Dot is that dot that shows up when a connection to a
perpendicular line (net) is made.  

 

So the question is.  have any of you found a workaround for the Junction Dot
issue.  is there a file that can be hacked or a property  somewhere that
controls this?

Other related posts: