[PCB_FORUM] Re: Number of Etch Layers in Skill

Hi Yves,

Or you could try:

number_layers = axlGetParam("paramLayerGroup:ETCH") ->nChildren

Cheers,

Ben


>>> yves@xxxxxxxxx 23/11/2004 9:57:12 a.m. >>>
How do I assign the number of layers in a board file to a variable to
be
used in an if statement ? 

ex.  if(GLB_Drill_Layers=="2" then __Drill_2Layers() );

How do I get the GLB_Drill_Layers to represent the number of etch
layers in
a board?

Thanks,
Yves



NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesyn Research Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesyn Research.
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: