[PCB_FORUM] Re: Not able to join PCB Forum

To the ICU-PCB Forum Moderators,

        Dale Rasmusen has been trying to subscribe and post messages to
        the forum, however all his emails get bounced, even the e-mail
        to subscribe to the forum. 
        
        Please read his message below:

Regards,
       Mike Finczak
       CopperCAD Design
       www.CopperCAD.com
       905-488-8958 

Start-------------------------------------------------------------------

-----Original Message-----
From: Dale Rasmusen [mailto:dale.rasmusen@xxxxxxxxxxxx] 
Sent: Monday, April 17, 2006 1:25 PM
To: 'Mike Finczak'
Subject: RE: [PCB_FORUM] Not able to join PCB Forum


Dear Mike,

 I am David's friend Dale.  The problem is that I can receive mail from
 the forum, I just cannot write to it.  If I could send a message to 
 the forum then there wouldn't be a problem.  Yes, I cannot even send 
 a message to them to "subscribe".  When I initally subscribed, they 
 allowed me to receive the forum, just not write to the forum.  Mike, if
 you could, can you please post this message to see if they can 
 fix the problem?  Thanks in advance.

 Handcuffed and silenced,

 Dale

end---------------------------------------------------------------------






-----Original Message-----
From: Mike Finczak [mailto:mike@xxxxxxxxxxxxx] 
Sent: Saturday, April 15, 2006 6:54 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Cc: 'Dale Rasmusen'
Subject: RE: [PCB_FORUM] Not able to join PCB Forum


David,

        Your friend Dale can subscribe to the ICU-PCB-Forum by
        sending an e-mail with the subject " Subscribe " to:

                 " icu-pcb-forum-request@xxxxxxxxxxxxx "

Info----------------------------------------------------------

 To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

  To view the archives of this list please login at
     http://www.freelists.org. 

 Our list name is icu-pcb-forum or go to
      http://www.freelists.org/archives/icu-pcb-forum/

 Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

--------------------------------------------------------------
        
Regards,
       Mike Finczak
       CopperCAD Design
       www.CopperCAD.com
       905-488-8958 


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Mattice
Sent: Friday, April 14, 2006 5:56 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Cc: Dale Rasmusen
Subject: [PCB_FORUM] Not able to join PCB Forum


My friend Dale needs someone's help to join
the forum.  Here is his email and I am copying
his email address.
 
Thanks,
david mattice
 
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Mark Salberg
Sent: Thursday, April 13, 2006 9:54 AM
To: Cadence User Group
Subject: [PCB_FORUM] Soft Located Ref Des vs Hard Located
 
Hello all,
If we move over to using $LOCATION / soft located ref des across a
schematic, will my ref des's change indisciminantly? I would appreciate
any feedback that would help me move to this with confidence.

1. If I use "preserve packaging, will it retain all original ref des and
only update new part ref des? 
In the past I have seen some parts get reassigned, changing ref des in
layout. <>2. If all are $LOCATION and I add a new part with "? location"
or copy an existing symbol to same ref des but $LOCATION which one will
change, the original or copied part.

3. If you copy a hard located part (connector) can you soft locate it
and add ? value so it will package?

My concern is...IS IT SAFE TO USE $LOCATION WITH NO DANGER OF PARTS IN
ALLEGRO CHANGING REF DES THAT ARE ALREADY PLACED / ROUTED? 

Also, if someone selects re-package by mistake, will it change any
original ref des? I have seen this in the past.

Thanks in advance,
Mark 
________________________________________________________________________
_____
Scanned by IBM Email Security Management Services powered by
MessageLabs. For more information please visit http://www.ers.ibm.com
________________________________________________________________________
_____




-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: