[PCB_FORUM] Re: (No To: icu-pcb-forum@xxxxxxxxxxxxx

Thanks John

John McMillan <jmcmill@xxxxxxxxxxx> wrote:      Hi Ruki,
   
  Please visit http://www.cdnusers.org/  and register as a user.
  There you can also enter the Forums and discuss issues with users worldwide.
   
  Below is the link to the SI and Modeling Forum:
  http://www.cdnusers.org/Forums/tabid/52/view/topics/forumid/1/Default.aspx
   
  Best Regards,
  John
   
   

      
---------------------------------
  From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of RUKI LERNER
Sent: Friday, June 22, 2007 6:59 AM
To: undisclosed-recipients
Subject: [PCB_FORUM] Re: (No To: icu-pcb-forum@xxxxxxxxxxxxx


  
  Hi All,
   
  Is there any forum that discuss SI related issues using SpecctraQuest tool.
   
  thanks,
  Ruki

Christopher Nunn <cnunn@xxxxxxxxx> wrote:
  Wow, that is a blast from the past... I guess I had forgotten that command 
from the old days.

Thanks Jim.

Chris

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx on behalf of Jim Saltouros
Sent: Thu 6/21/2007 7:14 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: uprev_overwrite



Chris,

You can run the 'dbstat' command on a (.brd or .dra) file
and it will return the database version and platform.

The 'dbstat' command is executed from a Command Prompt window

Here is an example:

E:\Temp_Files\Allegro\dbstat xyz.dra
xyz.dra: 14.2 NT

~Jimi

____________________________________________________________________
>
>
>Thanks Seiji and Charlie. 
>
>I am not sure as time goes on, how one would know what the last revision
>of software the symbol was saved in.
>
>Maybe someone from Cadence can weigh in on uprev protocol with respect
>to allegro symbols?
>
>Chris
>
>-----Original Message-----
>From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
>[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu seiji
>Sent: Thursday, June 21, 2007 4:48 PM
>To: icu-pcb-forum@xxxxxxxxxxxxx
>Subject: [PCB_FORUM] Re: uprev_overwrite
>
>Chris,
>
>My only problem I've had with the symbol not being uprevved is when I
>tried
>using Version 13 symbol on Version 15. I didn't have any problems using
>
>Version 14 symbols in Version 15. I think this is what Charlie was
>saying.
> Hope this what you are looking for.
>
>Seiji
>
>_______________________________
>>
>>From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
>>[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Christopher
>>Nunn
>>Sent: Thursday, June 21, 2007 6:02 PM
>>To: icu-pcb-forum@xxxxxxxxxxxxx
>>Subject: [PCB_FORUM] uprev_overwrite
>>
>>
>>
>>Hi,
>>
>>
>>
>>Are there users that are using the command in the subject line for
>>"up-revving" library symbols between software releases? It was
>>something we have done routinely for a long time, but may not even be
>>necessary. Any feedback would be appreciated.
>>
>>
>>
>>Thanks,
>>
>>Chris
>>

-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------


-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

    
---------------------------------
  Sucker-punch spam with award-winning protection.
Try the free Yahoo! Mail Beta.

       
---------------------------------
Ready for the edge of your seat? Check out tonight's top picks on Yahoo! TV.

Other related posts: