[PCB_FORUM] Re: (No To: icu-pcb-forum@xxxxxxxxxxxxx

Hi Ruki,
 
Please visit http://www.cdnusers.org/  and register as a user.
There you can also enter the Forums and discuss issues with users
worldwide.
 
Below is the link to the SI and Modeling Forum:
http://www.cdnusers.org/Forums/tabid/52/view/topics/forumid/1/Default.as
px
 
Best Regards,
John
 
 


________________________________

        From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of RUKI LERNER
        Sent: Friday, June 22, 2007 6:59 AM
        To: undisclosed-recipients
        Subject: [PCB_FORUM] Re: (No To: icu-pcb-forum@xxxxxxxxxxxxx
        
        
        Hi All,
         
        Is there any forum that discuss SI related issues using
SpecctraQuest tool.
         
        thanks,
        Ruki
        
        Christopher Nunn <cnunn@xxxxxxxxx> wrote:

                Wow, that is a blast from the past... I guess I had
forgotten that command from the old days.
                
                Thanks Jim.
                
                Chris
                
                ________________________________
                
                From: icu-pcb-forum-bounce@xxxxxxxxxxxxx on behalf of
Jim Saltouros
                Sent: Thu 6/21/2007 7:14 PM
                To: icu-pcb-forum@xxxxxxxxxxxxx
                Subject: [PCB_FORUM] Re: uprev_overwrite
                
                
                
                Chris,
                
                You can run the 'dbstat' command on a (.brd or .dra)
file
                and it will return the database version and platform.
                
                The 'dbstat' command is executed from a Command Prompt
window
                
                Here is an example:
                
                E:\Temp_Files\Allegro\dbstat xyz.dra
                xyz.dra: 14.2 NT
                
                ~Jimi
                
        
____________________________________________________________________
                >
                >
                >Thanks Seiji and Charlie. 
                >
                >I am not sure as time goes on, how one would know what
the last revision
                >of software the symbol was saved in.
                >
                >Maybe someone from Cadence can weigh in on uprev
protocol with respect
                >to allegro symbols?
                >
                >Chris
                >
                >-----Original Message-----
                >From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
                >[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf
Of arimitsu seiji
                >Sent: Thursday, June 21, 2007 4:48 PM
                >To: icu-pcb-forum@xxxxxxxxxxxxx
                >Subject: [PCB_FORUM] Re: uprev_overwrite
                >
                >Chris,
                >
                >My only problem I've had with the symbol not being
uprevved is when I
                >tried
                >using Version 13 symbol on Version 15. I didn't have
any problems using
                >
                >Version 14 symbols in Version 15. I think this is what
Charlie was
                >saying.
                > Hope this what you are looking for.
                >
                >Seiji
                >
                >_______________________________
                >>
                >>From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
                >>[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf
Of Christopher
                >>Nunn
                >>Sent: Thursday, June 21, 2007 6:02 PM
                >>To: icu-pcb-forum@xxxxxxxxxxxxx
                >>Subject: [PCB_FORUM] uprev_overwrite
                >>
                >>
                >>
                >>Hi,
                >>
                >>
                >>
                >>Are there users that are using the command in the
subject line for
                >>"up-revving" library symbols between software
releases? It was
                >>something we have done routinely for a long time, but
may not even be
                >>necessary. Any feedback would be appreciated.
                >>
                >>
                >>
                >>Thanks,
                >>
                >>Chris
                >>
                
        
-----------------------------------------------------------
                To subscribe/unsubscribe:
                Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
                with a subject of subscribe or unsubscribe
                
                To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
                
                Problems or Questions:
                Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
        
-----------------------------------------------------------
                
                
        
-----------------------------------------------------------
                To subscribe/unsubscribe: 
                Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
                with a subject of subscribe or unsubscribe
                
                To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
                
                Problems or Questions:
                Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
        
-----------------------------------------------------------
                


        
________________________________

        Sucker-punch spam
<http://us.rd.yahoo.com/evt=49981/*http://advision.webevents.yahoo.com/m
ailbeta/features_spam.html>  with award-winning protection.
        Try the free Yahoo! Mail Beta.
<http://us.rd.yahoo.com/evt=49981/*http://advision.webevents.yahoo.com/m
ailbeta/features_spam.html>

Other related posts: