[PCB_FORUM] Re: (No Date: Thu, 26 Apr 2007 04:43:07 -0700

Or...delete all other rules from the first board before exporting the
tech file. Don't know if that would be easier or not...

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
gnieski_mike@xxxxxxx
Sent: Thursday, April 26, 2007 7:34 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] 

        Anybody know an easy way to extract one particular
net_spacing_type from one board
        to use on another board? Other than extracting an entire
techfile, editing the file to find
        that one particular spacing type, and importing that section of
the techfile back into a
        board?

        thanks,
        Mike

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: