[PCB_FORUM] Re: (No Date: Fri, 27 Apr 2007 07:03:44 -0400

 You could try the following :
 
 Open up the Constraint set :
 Setup > Constraints 
 Spacing rules Set > Set Values
 
 Browse to the Spacing set name you wish to copy.. 
 press "CTRL + P"
 This will launch the Print Spacing Rule Set GUI
 Save the constraint to a Script (File Script Format) or to File *.txt format
 
 It will create the following SCR file :
 
 #Allegro form script for form: Spacing Rule Set Etch Spacing Values
 # WARNING: THIS IS FOR REFERENCE PURPOSES, MAY NOT REPLAY CORRECTLY!
 # start time: Fri Apr 27 11:44:16 2007
 cns
 cns space values
 setwindow form.cns_space_values
 FORM cns_space_values constraint_set_name DEFAULT 

FORM cns_space_values subclass ALL ETCH 

FORM cns_space_values constraint_name? 

FORM cns_space_values elements_list Global 

FORM cns_space_values pin_to_pin '5 MIL' 

FORM cns_space_values line_to_pin '5 MIL' 

FORM cns_space_values line_to_line '5 MIL' 

FORM cns_space_values via_to_pin '5 MIL' 

FORM cns_space_values via_to_via '5 MIL' 

FORM cns_space_values via_to_line '5 MIL' 

FORM cns_space_values shape_to_pin '5 MIL' 

FORM cns_space_values shape_to_via '5 MIL' 

FORM cns_space_values shape_to_line '5 MIL' 

FORM cns_space_values shape_to_shape '5 MIL' 

FORM cns_space_values same_net_drc Off 

FORM cns_space_values max_bb_via_gap '5 MIL' 

# stop time: Fri Apr 27 11:44:16 2007
 
 ** Not sure how you import this back into another board however, I tried it but
 failed..
     
 -----Original Message-----
 From: gnieski_mike@xxxxxxx
 To: icu-pcb-forum@xxxxxxxxxxxxx
 Sent: Thu, 26 Apr 2007 12:33 PM
 Subject: [PCB_FORUM] 
 
       Anybody know an easy way to extract one particular

net_spacing_type from one board

    to use on another board? Other than extracting an entire

techfile, editing the file to find

    that one particular spacing type, and importing that section of

the techfile back into a

    board?



    thanks,

    Mike



-----------------------------------------------------------

To subscribe/unsubscribe: 

Send a message to 
icu-pcb-forum-request@xxxxxxxxxxxxxxxxx://www.freelists.org/archives/icu-pcb-forum/icu-pcb-forum-admins@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 

Problems or Questions:
Send an email to 
-----------------------------------------------------------

   
________________________________________________________________________
Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading spam 
and email virus protection.

Other related posts: