[PCB_FORUM] Netlist from an Excel spreadsheet

Hi All,

We are working with a substrate house to develop a new substrate, and were 
wondering if anyone has imported a netlist from a spread sheet.  When we try it 
with the performance plus option, we get the message "packager files not 
found".  Is there a correct way do accomplish such a task?

Thanks,

Dale R.
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of ISMAIL
Sent: Monday, June 08, 2009 2:57 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: No text or lines showing up in Gerbers...


 Hi Astin,

Go to "Text setup" and set the "Photo Width" to some value other than zero for 
all the Text blks.
Now try generate Gerber and check.Hope this helps.

Thanks,
Ismail.A.
<http://groups.yahoo.com/group/nidokidos>


________________________________
From: "Schwartz, Jerome" <jschwa01@xxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Friday, 5 June, 2009 2:21:31 AM
Subject: [PCB_FORUM] Re: No text or lines showing up in Gerbers...
Austin,

If you add a photoplot width to your all your text you won't
need to change the Gerber setup. The width can vary for the text size too.


Jerry


________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Thursday, June 04, 2009 4:46 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: No text or lines showing up in Gerbers...
Hi Gerry,

Yep, found that on my own.  Then found it has to be set for EVERY one, even if 
all them are checked.  I should have known that, given reading the file into 
GerbTool gave me a zero error.  I should have done two minutes of looking 
before asking the list, but the good news, is every reply was right ;-)

Regards,

Austin
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Gerry Meier
Sent: Thursday, June 04, 2009 3:38 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: No text or lines showing up in Gerbers...
[cid:image001.jpg@01C9E8F7.63AF0370]

Gerry Meier, Sr. PCB Designer
Freedom CAD Services. Inc
Voice: (256) 776-7470 or (603) 864-1350
Email:gerry.meier@xxxxxxxxxxxxxx
visit us at http://www.freedomcad.com




________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Thursday, June 04, 2009 2:33 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: No text or lines showing up in Gerbers...
Undefined line width...  Why the identical text in one shows up and not in the 
other two...I have no clue...yet.

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Austin Franklin
Sent: Thursday, June 04, 2009 3:24 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] No text or lines showing up in Gerbers...
Hi,

When I bring go to the manufacturing/artwork tab, and select, say, fabrication 
drawing and display to make the display look like what the Gerber should look 
like, it looks fine.  I print it out, and everything is great.  But, when the 
Gerbers get generated, ALL text and lines are gone!  Etch is fine...

What is going on here?

Thanks,

Austin


This correspondence and any attachments are considered confidential. If you are 
not the intended recipient, please notify Freedom CAD Services, Inc. 
immediately by either replying to this message or by sending an email to 
operations@xxxxxxxxxxxxxx; please destroy all copies of this message and any 
attachments. Thank you.


________________________________
________________________________
Explore your hobbies and interests. Click here to 
begin.<http://in.rd.yahoo.com/tagline_groups_6/*http:/in.promos.yahoo.com/groups/>

JPEG image

Other related posts: