[PCB_FORUM] Re: Need Help with Error in Text Ling Origin!

I ran into a similar problem a while back. I did Setup/Text Sizes?compact and 
it fixed the problem. I just do not recal if is showed any X Y location, but 
the rest of it sounds familiar. 

Peter

-----Original Message-----
>From: "Piekos, Ed" <Ed.Piekos@xxxxxxxxxxxxxxx>
>Sent: May 24, 2006 12:26 PM
>To: "'icu-pcb-forum@xxxxxxxxxxxxx'" <icu-pcb-forum@xxxxxxxxxxxxx>
>Subject: [PCB_FORUM] Re: Need Help with Error in Text Ling Origin!
>
>
>I got this error some time back (TEXT LINE OUT OF EXTENTS) and nothing
>seemed to correct it. After narrowing it down to a symbol, I tried deleting
>and replacing it with no luck. Ended up re-building the part and that
>cleared the error, so it was something done at the symbol level.
>
>Good Luck! These things always seem to pop up when running artwork...
>
>Ed Piekos, C.I.D.+
>Sycamore Networks
>ed.piekos@xxxxxxxxxxxxxxx 
>
>-----Original Message-----
>From: Judy Huang [mailto:judyh@xxxxxxxxxx]
>Sent: Wednesday, May 24, 2006 10:29 AM
>To: icu-pcb-forum@xxxxxxxxxxxxx
>Subject: [PCB_FORUM] Need Help with Error in Text Ling Origin!
>
>
>Hi All,
>
>I have encountered the following error message while generating gerber 
>files:
>
> ERROR IN TEXT LINE origin = (6425.000 -544995.912)
>  class = BOARD GEOMETRY
>  subclass = SILKSCREEN_BOTTOM
>  TEXT LINE OUT OF EXTENTS
>  Error cannot be fixed.
> ERROR   INVALID SECTOR ROW
>  Error cannot be fixed.
>Regenerating DRC
>  0 original DRC errors replaced by
>  0 current DRC errors.
>0 warnings, 2 errors detected, 0 errors  fixed.
>
>
>Seems (6425.000 -544995.912) is out of range (on my page), can someone teach
>
>me how to solve this issue?  I'm thinking about using Techfile, Sub-Drawings
>
>(excluding the Silkscreen Bottom, which seems to be where the issue is) and 
>regenerate the layout file on a new design. Does anyone know if this will 
>work?  Or is there any other way of doing it?
>
>Any help will be appreciated.  Thanks all!
>
>Regards,
>
>Judy Huang
>ATE Resources, Inc.
>Mobile: 0933468325
>Office:  03-5516680 Ext. 325
>Fax: 03-5587916 
>
>
>-----------------------------------------------------------
>To subscribe/unsubscribe: 
>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>with a subject of subscribe or unsubscribe
>
>To view the archives of this list go to
>http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or Questions:
>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>-----------------------------------------------------------
>-----------------------------------------------------------
>To subscribe/unsubscribe: 
>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>with a subject of subscribe or unsubscribe
>
>To view the archives of this list go to 
>http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or Questions:
>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: