[PCB_FORUM] Need Help with Error in Text Ling Origin!

Hi All,

I have encountered the following error message while generating gerber files:

ERROR IN TEXT LINE origin = (6425.000 -544995.912)
 class = BOARD GEOMETRY
 subclass = SILKSCREEN_BOTTOM
 TEXT LINE OUT OF EXTENTS
 Error cannot be fixed.
ERROR   INVALID SECTOR ROW
 Error cannot be fixed.
Regenerating DRC
 0 original DRC errors replaced by
 0 current DRC errors.
0 warnings, 2 errors detected, 0 errors  fixed.


Seems (6425.000 -544995.912) is out of range (on my page), can someone teach me how to solve this issue? I'm thinking about using Techfile, Sub-Drawings (excluding the Silkscreen Bottom, which seems to be where the issue is) and regenerate the layout file on a new design. Does anyone know if this will work? Or is there any other way of doing it?

Any help will be appreciated.  Thanks all!

Regards,

Judy Huang
ATE Resources, Inc.
Mobile: 0933468325
Office: 03-5516680 Ext. 325
Fax: 03-5587916


-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: