[PCB_FORUM] Re: NO_VIA_CONNECT property

Sorry less the property you want to use is NO_SHAPE_CONNECT 

~Rich

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Les Wong
Sent: Friday, August 17, 2007 11:58 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: NO_VIA_CONNECT property

I tried this,
but it still connected to the shape

--- "Van Os, Richard (GE Healthcare)"
<Richard.VanOs@xxxxxxxxxx> wrote:

> One use is when you don't want the via to tie to a ground or power 
> plane because you want to tie it on an etch layer.
> 
> Richard Van Os
> 
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Les Wong
> Sent: Friday, August 17, 2007 11:38 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] NO_VIA_CONNECT property
> 
> Hi All:
> 
> I am trying to use the via property: NO_VIA_CONNECT
> 
> Does anyone know what this property is supposed to control ?
> 
> Here is the documented definition:
> 
> The NO_VIA_CONNECT property, attached to a pin or via, specifies that 
> padstacks are not connected even when they overlap.
> 
> Thanks,
> Les Wong
> 
>
-----------------------------------------------------------
> To subscribe/unsubscribe: 
> Send a message to
> icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to 
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>
-----------------------------------------------------------
>
-----------------------------------------------------------
> To subscribe/unsubscribe: 
> Send a message to
> icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to 
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>
-----------------------------------------------------------
> 

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: