[PCB_FORUM] Re: NO_VIA_CONNECT property

Hi Les,
When the no-via-connect property is attached to a via in a plane shape
it will not put a thermal or will not connect to that plane even if it
is the same net name.
Peggy


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Les Wong
Sent: Friday, August 17, 2007 10:38 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] NO_VIA_CONNECT property

Hi All:

I am trying to use the via property: NO_VIA_CONNECT 

Does anyone know what this property is supposed to
control ?

Here is the documented definition:

The NO_VIA_CONNECT property, attached to a pin or via,
specifies that padstacks are not connected even when
they overlap.

Thanks,
Les Wong

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: