[PCB_FORUM] More problems with Flash Symbols
- From: "Bolman, Shirley H" <shirley.h.bolman@xxxxxxxxx>
- To: "icu-pcb-forum@xxxxxxxxxxxxx" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 25 Aug 2009 14:30:02 -0700
I am currently running 15.7 and have recently found that a padstack created
with flash symbols looks ok when using Pad Designer. But when I do a
Tools>Padstack>Modify Design Padstacks and edit the circular padstack in the
footprint I see the flashes defined as Rectangular.
Has anyone had this problem before?
Shirley in Oregon
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Bradley, Shirley
Sent: Wednesday, July 22, 2009 1:26 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Cc: icu-pcb-forum-bounce@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Flash Symbol
I can make the oblong pad, but I need to make the flash symbol for the
inner layers. We are on 16.2.
Shirley M. Bradley
Intermec
tel: 319.369.3328
shirley.bradley@xxxxxxxxxxxx
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
Shahed.Safavi-Bayat@xxxxxxxxxxxxxxxxxxxxx
Sent: Wednesday, July 22, 2009 3:13 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Cc: icu-pcb-forum@xxxxxxxxxxxxx; icu-pcb-forum-bounce@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Flash Symbol
Oblong pad is available in 15.7 and up. Neither of previous emails
mentioned which version of Allegro is.
Shahed
|------------>
| From: |
|------------>
>-----------------------------------------------------------------------
------------------------------------------------------------------------
---|
|davidkel <davidkel@xxxxxxxxx>
|
>-----------------------------------------------------------------------
------------------------------------------------------------------------
---|
|------------>
| To: |
|------------>
>-----------------------------------------------------------------------
------------------------------------------------------------------------
---|
|<icu-pcb-forum@xxxxxxxxxxxxx>
|
>-----------------------------------------------------------------------
------------------------------------------------------------------------
---|
|------------>
| Date: |
|------------>
>-----------------------------------------------------------------------
------------------------------------------------------------------------
---|
|07/22/2009 04:09 PM
|
>-----------------------------------------------------------------------
------------------------------------------------------------------------
---|
|------------>
| Subject: |
|------------>
>-----------------------------------------------------------------------
------------------------------------------------------------------------
---|
|[PCB_FORUM] Re: Flash Symbol
|
>-----------------------------------------------------------------------
------------------------------------------------------------------------
---|
Hi
Maybe I missed something here. But you can make an oblong pad by
specifying the height And width and the tool makes the pad for you. Why
do you need to make the shape?
Dave
On 7/22/09 2:07 PM, "Dharma Kemp-Bresett" <dharma@xxxxxxx> wrote:
Hi Shirley,
I agree but unless I just don't know about it this is the only
option we have for now.... Anybody willing/able to prove me wrong
I
would be VERY happy to hear it. As would Shirley, I am assuming...
:-)
Thanks,
Dharma
KAW/USA Ltd.
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax
Confidentiality Notice: This email and any accompanying documents
contain information that is confidential, privileged or exempt
from
disclosure under applicable law and is intended for the exclusive
use
of the addressee. This information is private and protected by
law.
If you are not the intended recipient, or have received this email
in
error, you are hereby notified that any disclosure, copying,
distribution or use of the contents of this document in any manner
is
strictly prohibited.
From: Bradley, Shirley [mailto:shirley.bradley@xxxxxxxxxxxx]
Sent: Wednesday, July 22, 2009 4:00 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Flash Symbol
This is similar to what I did. Made it for the smallest dimension,
pulled it apart for the long dimension and stretched the sides. If
Cadence made it easy to make a round flash and it is easy to make
an
oval pad, they should have an easy way to make the oval flash.
Thanks for your answer.
Shirley M. Bradley
Intermec
tel: 319.369.3328
shirley.bradley@xxxxxxxxxxxx
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [
mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma
Kemp-Bresett
Sent: Wednesday, July 22, 2009 2:51 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Flash Symbol
Hi Shirley,
Yes, Build a normal flash to the size of your smallest dimension
then
open it as a symbol .dra and then separate the two "sides" and
stretch (extend) the long sides by the difference between your
shortest and longest dimensions. If this "quick and dirty"
response
is confusing to you ( and I admit it might be) reply to me offline
and I can give you more detailed info.
Thanks,
Dharma
KAW/USA Ltd.
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax
Confidentiality Notice: This email and any accompanying documents
contain information that is confidential, privileged or exempt
from
disclosure under applicable law and is intended for the exclusive
use
of the addressee. This information is private and protected by
law.
If you are not the intended recipient, or have received this email
in
error, you are hereby notified that any disclosure, copying,
distribution or use of the contents of this document in any manner
is
strictly prohibited.
From: Bradley, Shirley [mailto:shirley.bradley@xxxxxxxxxxxx]
Sent: Wednesday, July 22, 2009 3:43 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Flash Symbol
Greetings,
Is there an easy way to make a flash symbol for an oval plated
hole?
Thanks,
Shirley M. Bradley
Intermec
tel: 319.369.3328
shirley.bradley@xxxxxxxxxxxx
This message is intended only for the named recipient. If you are
not
the intended recipient, you are notified that disclosing, copying,
distributing or taking any action based on the contents of this
information is strictly prohibited.
This message is intended only for the named recipient. If you are
not
the intended recipient, you are notified that disclosing, copying,
distributing or taking any action based on the contents of this
information is strictly prohibited.
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
This message is intended only for the named recipient. If you are not the
intended recipient, you are notified that disclosing, copying, distributing or
taking any action based on the contents of this information is strictly
prohibited.
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
- » [PCB_FORUM] More problems with Flash Symbols - Bolman, Shirley H
