[PCB_FORUM] Re: Low on available memory, please exit the program.

True, 2G ram & xp pro will work on all allegro boards, 
4G ram is min. for simulation & others graphic softwares  (games included 64 
bits)
If you want more detail you need contact vendors for a min. req. of your pc 
.....
--
Robert
Cell: (760)672-6540

---- "Walter Boese Jr." <walterb@xxxxxxx> wrote: 
> Not that this is your problem, but for info purposes.
> Windows XP cannot address 4gig of memory.
> There is a 3gig switch, but we have found that to be problematic.
> 
> The only way to address 4gig is with Windows XP Pro 64bit and Cadence 
> does not support 64bit Windows at this time.
> 
> Walter Boese Jr.
> SGI
> 
> 
> Julian Ungureanu (jungurea) wrote:
> >  
> > I thought I post this here before I open a case with Cadence.
> > I get this message when updating DRCs.
> > The brd file is ~100 Mb.
> > T61P, 2.2 GHz, 4 Gb RAM, Windoze XP
> > Any ideas why?
> >  
> >  
> > Thanks,
> > Julian U.
> >  
> >  
> 
> -- 
> 
> 
> Walter Boese, Jr.
> walterb@xxxxxxx               
> 
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to 
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: