[PCB_FORUM] Re: Low on available memory, please exit the program.

when I updating a sun's motherboard 150M size with heavy constraint rules on 
it, it took my labtop pc 15min (I turned off all others process,), I ususally 
kill the process, or turn off the power & restart if my pc is cooking more than 
20 min. on any board... when I autorout I ain't use my labtop, I use standalone 
portable pc ...
the Task manager is just for look, not a true measurment .... evaluate and 
average a true process on a pc is a complex job ....
--
Robert
Cell: (760)672-6540

---- "Julian Ungureanu (jungurea)" <jungurea@xxxxxxxxx> wrote: 
> I have created a case.
> Although Allegro uses ~700 Mb of RAM (I am looking at Task Manager),
> there should be lots left for Outlook (24 Mb) , IE (~46 Mb).
> System load shows 50%.
> I know it should take about 3 to 3.5 hours; what I wanted to know if
> anyone on this list has encountered the same thing and has a resolution
> for it.
> 
> Thanks,
> Julian
> 
> -----Original Message-----
> From: Dave Schaefer [mailto:dave.schaefer@xxxxxxx] 
> Sent: Wednesday, February 20, 2008 8:27 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Cc: Julian Ungureanu (jungurea)
> Subject: Re: [PCB_FORUM] Re: Low on available memory, please exit the
> program.
> 
> I've found running other memory hog applications (Autocad for example)
> simulataneously results in hanging or crashing, and agree you should
> exit other applications when running DRCs or Dynamic Pours on a design
> that size.
> 
> Would be interesting to hear a response from Cadence.
> 
> Hth,
> Dave
> > 
> > From: <robert.h@xxxxxxx>
> > Date: 2008/02/20 Wed AM 10:15:05 CST
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > CC: "Julian Ungureanu (jungurea)" <jungurea@xxxxxxxxx>
> > Subject: [PCB_FORUM] Re: Low on available memory, please exit the  
> > program.
> > 
> > When I have the board this size, I turn off all others process, let
> the pc cooks the board alone.... use others pc for the xls, word, web
> etc ....
> > Updating DRCs is a heavy work for the processor, special when you have
> large board, rules on it.
> > My is a std 3.3GHz, 4GRam
> > enjoy ....
> > --
> > Robert
> > Cell: (760)672-6540
> > 
> > ---- "Julian Ungureanu (jungurea)" <jungurea@xxxxxxxxx> wrote: 
> > > I have all of the above (Sametime, IE Outlook) running.
> > > I tried batch DRC and I got the same  result.
> > >  
> > > Julian
> > > 
> > > ________________________________
> > > 
> > > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of David Kelly
> > > (davidkel)
> > > Sent: Wednesday, February 20, 2008 7:28 AM
> > > To: icu-pcb-forum@xxxxxxxxxxxxx
> > > Subject: [PCB_FORUM] Re: Low on available memory, please exit the 
> > > program.
> > > 
> > > 
> > > Julian
> > >  
> > > Do you have much running at the same time, Outlook, Sametime, 
> > > Firefox or Explorer .....
> > > Have you tried exiting Allegro and running it stand alone from the 
> > > command line ( I haven't done this in a long time, I assume it still
> 
> > > works).
> > >  
> > > Dave
> > >  
> > > David Kelly
> > > davidkel@xxxxxxxxx
> > > 720-562-6316
> > >  
> > > 
> > > ________________________________
> > > 
> > > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Julian 
> > > Ungureanu (jungurea)
> > > Sent: Wednesday, February 20, 2008 8:17 AM
> > > To: icu-pcb-forum@xxxxxxxxxxxxx
> > > Subject: [PCB_FORUM] Low on available memory, please exit the
> program.
> > > 
> > > 
> > >  
> > > I thought I post this here before I open a case with Cadence.
> > > I get this message when updating DRCs.
> > > The brd file is ~100 Mb.
> > > T61P, 2.2 GHz, 4 Gb RAM, Windoze XP
> > > Any ideas why?
> > >  
> > >  
> > > Thanks,
> > > Julian U.
> > >  
> > >  
> > 
> > -----------------------------------------------------------
> > To subscribe/unsubscribe: 
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> > 
> > To view the archives of this list go to 
> > http://www.freelists.org/archives/icu-pcb-forum/
> > 
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > -----------------------------------------------------------
> > 
> 
> Dave Schaefer
> dave.schaefer@xxxxxxx
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to 
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: