[PCB_FORUM] Re: Low on available memory, please exit the program.

When I have the board this size, I turn off all others process, let the pc 
cooks the board alone.... use others pc for the xls, word, web etc ....
Updating DRCs is a heavy work for the processor, special when you have large 
board, rules on it.
My is a std 3.3GHz, 4GRam
enjoy ....
--
Robert
Cell: (760)672-6540

---- "Julian Ungureanu (jungurea)" <jungurea@xxxxxxxxx> wrote: 
> I have all of the above (Sametime, IE Outlook) running.
> I tried batch DRC and I got the same  result.
>  
> Julian
> 
> ________________________________
> 
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of David Kelly
> (davidkel)
> Sent: Wednesday, February 20, 2008 7:28 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Low on available memory, please exit the
> program.
> 
> 
> Julian
>  
> Do you have much running at the same time, Outlook, Sametime, Firefox or
> Explorer .....
> Have you tried exiting Allegro and running it stand alone from the
> command line ( I haven't
> done this in a long time, I assume it still works).
>  
> Dave
>  
> David Kelly
> davidkel@xxxxxxxxx
> 720-562-6316
>  
> 
> ________________________________
> 
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Julian
> Ungureanu (jungurea)
> Sent: Wednesday, February 20, 2008 8:17 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Low on available memory, please exit the program.
> 
> 
>  
> I thought I post this here before I open a case with Cadence.
> I get this message when updating DRCs.
> The brd file is ~100 Mb.
> T61P, 2.2 GHz, 4 Gb RAM, Windoze XP
> Any ideas why?
>  
>  
> Thanks,
> Julian U.
>  
>  

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: