[PCB_FORUM] Re: Long files names in allegro

David

When IPC-356 is run, long net names will be renamed. A mapping chart is
gemerated. Example below.
 

C  ****************************************

C     Name mapping for long Signal names

C  ****************************************

C

P  NNAMEm0000 S20_TUNER_CONTROL_B2

P  NNAMEm0001 S21_TUNER_CONTROL_B3

P  NNAMEm0002 RFD_COMP_SPI_CS_N

P  NNAMEm0003 S18_TUNER_CONTROL_B0

P  NNAMEm0004 S19_TUNER_CONTROL_B0

P  NNAMEm0005 S18_TUNER_CONTROL_B1

P  NNAMEm0006 S18_TUNER_CONTROL_A1

P  NNAMEm0007 S18_TUNER_CONTROL_B2

P  NNAMEm0008 RFD_COMP_SPI_DATA_IN_N

P  NNAMEm0009 CHANNEL_5_6_RESET_L

P  NNAMEm0010 RFD_MTRX_SPI_CLK_N

P  NNAMEm0011 RFD_MTRX_SPI_CS_P

P  NNAMEm0012 S18_TUNER_CONTROL_A3

P  NNAMEm0013 RFD_MTRX_SPI_DATA_OUT_P

P  NNAMEm0014 RFD_COMP_SPI_DATA_OUT_N

P  NNAMEm0015 RFD_MTRX_SPI_CS_N

P  NNAMEm0016 S20_76_8PECL_OUT1_L

P  NNAMEm0017 POWER_SUPPLY_I2C_CLK

P  NNAMEm0018 CHANNEL_7_8_RESET_L

P  NNAMEm0019 S20_TUNER_CONTROL_B3   

Thurlow deHorsey


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of David Greig
Sent: Monday, January 05, 2009 2:08 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Long files names in allegro

Hi Dharma

There is an issue that will remain if you use the setting to support
long padstack name, namely IPC-356 netlists which only
support a few characters. 


Best Regards
 
David Greig


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma
Kemp-Bresett
Sent: 05 January 2009 17:34
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Long files names in allegro

Hi Everyone,
We have run into a problem with long file names in 15.5. We have a
customer who uses very long files names for their padstacks.
Previously we were able to add these with no problem ( may have been
using an expert license at the
time) but now we get a "file name too long" error. Is there a switch in
preferences, Or elsewhere, that I am missing that will
allow us to use long file names?
Thanks in advance and I wish you all a Happy New Year!, Dharma 



KAW/USA Ltd. 
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax 

Confidentiality Notice: This email and any accompanying documents
contain information that is confidential, privileged or exempt
from disclosure under applicable law and is intended for the exclusive
use of the addressee. This information is private and
protected by law. If you are not the intended recipient, or have
received this email in error, you are hereby notified that any
disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.



-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: