[PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- From: rjbzxr@xxxxxxxxxxxx
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Mon, 26 Mar 2007 04:50:38 -0400
SPB15.7 and SPB16.x will only be supported under
RHEL 3.0 Update 5, RHEL 4.0 Update 1 , or SLES9 (SUSE) (SP1)
Located in the PCBSYSTEMREQS.PDF in the Installation directory
%CDSROOR%\doc\pcbsystemreqs
-----Original Message-----
From: walterb@xxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Thu, 22 Mar 2007 1:32 PM
Subject: [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
Hello,
As far as I know the current SPB 15.7 or earlier will not work with this
RHEL5. I have been running FC5 for a while which has the a similar code base as
RHEL5.
I get a glib or was it a glibc library error message. This all worked with FC3
and RHEL4.
It would be nice if they could find a way to support both versions for a
while. :)
Walter Boese Jr.
David Greig wrote:
> Hi List,
> > Has anyone any experience of running SPB on Redhat RHEL5 Workstation?
> (Redhat recently brought out version 5)
> I'm moving from Win2k to something that's going to be supported by the >
> major tools, and my conclusion is that XP/Vista are not suitable for >
> engineering workstation use!
> > Best Regards
> > David Greig
> ______________________________
> > GigaDyne Ltd
> 5 Albany Business Centre
> Gardeners Street
> Dunfermline KY12 0RN
> United Kingdom
> t: +44 (0)1383 624 975
> www.gigadyne.co.uk
> ______________________________
>
--
Walter Boese, Jr.
walterb@xxxxxxx
-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
________________________________________________________________________
Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading spam
and email virus protection.
- Follow-Ups:
- [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- From: David Greig
- References:
- [PCB_FORUM] Linux & SPB15.7 and 16.x
- From: David Greig
- [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- From: Walter Boese Jr.
Other related posts:
- » [PCB_FORUM] Linux & SPB15.7 and 16.x
- » [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- » [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- » [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- » [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- » [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- » [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- » [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- » [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- » [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- From: David Greig
- [PCB_FORUM] Linux & SPB15.7 and 16.x
- From: David Greig
- [PCB_FORUM] Re: Linux & SPB15.7 and 16.x
- From: Walter Boese Jr.