[PCB_FORUM] Re: Linux & SPB15.7 and 16.x

Walter,

Thanks. The libraries were one of my concerns. 


Best Regards
 
David Greig
______________________________
GigaDyne Ltd
5 Albany Business Centre
Gardeners Street
Dunfermline KY12 0RN
United Kingdom
t: +44 (0)1383 624 975
www.gigadyne.co.uk
______________________________

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Walter Boese Jr.
Sent: 22 March 2007 13:32
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Linux & SPB15.7 and 16.x

Hello,
As far as I know the current SPB 15.7 or earlier will not work with this RHEL5. 
I have been running FC5 for a while which has the a similar code base as RHEL5.
I get a glib or was it a glibc library error message.  This all worked with FC3 
and RHEL4.

It would be nice if they could find a way to support both versions for a while. 
 :)

Walter Boese Jr.

David Greig wrote:
> Hi List,
>  
> Has anyone any experience of running SPB on Redhat RHEL5 Workstation?
> (Redhat recently brought out version 5) I'm moving from Win2k to 
> something that's going to be supported by the major tools, and my 
> conclusion is that XP/Vista are not suitable for engineering 
> workstation use!
>  
> Best Regards
>  
> David Greig
> ______________________________
>  
> GigaDyne Ltd
> 5 Albany Business Centre
> Gardeners Street
> Dunfermline KY12 0RN
> United Kingdom
> t: +44 (0)1383 624 975
> www.gigadyne.co.uk
> ______________________________
>  

-- 


Walter Boese, Jr.
walterb@xxxxxxx         

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
--
Virus scanned by Lumison.

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: