[PCB_FORUM] Re: Length matching for DDR - was - RE: Realer V6.01 Constraint Manager
- From: "richard moffat" <richard.moffat@xxxxxxxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Fri, 29 Feb 2008 07:02:32 +1300
Yeah, sorry guys. Got too carried away. Last post, promise!
__________________________
Richard Moffat
PCB CAD Manager
Allied Telesis Labs
ph. +64 (3) 3393000
richard.moffat@xxxxxxxxxxxxxxxxxxx
>>> "Austin Franklin" <allegrolist@xxxxxxxxxxxx> 02/29/08 6:57 AM >>>
Hi Gerry,
> Can you guys take this off-line please
Agreed. Up to this point, I felt it was pertinent, but has certainly taken
a drift off the point. Sorry.
Regards,
Austin
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesis Labs Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesis Labs.
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
