[PCB_FORUM] Re: Is there any way to replace more than one via, but not all of them?

Hi Shahed,

I'll give it a try, thanks!

Regards,

Austin

> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of
> Shahed.Safavi-Bayat@xxxxxxxxxxxxxxxx
> Sent: Friday, August 22, 2008 9:07 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Cc: icu-pcb-forum@xxxxxxxxxxxxx; icu-pcb-forum-bounce@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Is there any way to replace more than one via,
> but not all of them?
>
>
> Use temp group to select Vias you want to edit .In this case select Circle
> as Geometry. Then enter an arbitrary number for size in Width and Height.
> Autogenerate name or give any name you like.
> Now you have set of vias which you can change pad stack size in one shot.
>
>
> Shahed
>
>
> |------------>
> | From:      |
> |------------>
>
> >-----------------------------------------------------------------
> ------------------------------------------------------------------
> ---------------|
>   |"Austin Franklin" <allegrolist@xxxxxxxxxxxx>
>
>                  |
>
> >-----------------------------------------------------------------
> ------------------------------------------------------------------
> ---------------|
> |------------>
> | To:        |
> |------------>
>
> >-----------------------------------------------------------------
> ------------------------------------------------------------------
> ---------------|
>   |<icu-pcb-forum@xxxxxxxxxxxxx>
>
>                  |
>
> >-----------------------------------------------------------------
> ------------------------------------------------------------------
> ---------------|
> |------------>
> | Date:      |
> |------------>
>
> >-----------------------------------------------------------------
> ------------------------------------------------------------------
> ---------------|
>   |08/22/2008 08:54 AM
>
>                  |
>
> >-----------------------------------------------------------------
> ------------------------------------------------------------------
> ---------------|
> |------------>
> | Subject:   |
> |------------>
>
> >-----------------------------------------------------------------
> ------------------------------------------------------------------
> ---------------|
>   |[PCB_FORUM] Re: Is there any way to replace more than one via,
> but not all of them?
>                  |
>
> >-----------------------------------------------------------------
> ------------------------------------------------------------------
> ---------------|
>
>
>
>
>
> Hi Shahed,
>
> I looked at that, but it didn't make sense how to use to replace vias.
> Have
> you used it for that?  If so, how?
>
> Regards,
>
> Austin
>
>
> > -----Original Message-----
> > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of
> > Shahed.Safavi-Bayat@xxxxxxxxxxxxxxxx
> > Sent: Friday, August 22, 2008 7:59 AM
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Cc: icu-pcb-forum@xxxxxxxxxxxxx; icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] Re: Is there any way to replace more than one via,
> > but not all of them?
> >
> >
> > You can use Group edit.
> >
> > Shahed
> >
> >
> > |------------>
> > | From:      |
> > |------------>
> >
> > >-----------------------------------------------------------------
> > ------------------------------------------------------------------
> > ---------------|
> >   |"Austin Franklin" <allegrolist@xxxxxxxxxxxx>
> >
> >                  |
> >
> > >-----------------------------------------------------------------
> > ------------------------------------------------------------------
> > ---------------|
> > |------------>
> > | To:        |
> > |------------>
> >
> > >-----------------------------------------------------------------
> > ------------------------------------------------------------------
> > ---------------|
> >   |<icu-pcb-forum@xxxxxxxxxxxxx>
> >
> >                  |
> >
> > >-----------------------------------------------------------------
> > ------------------------------------------------------------------
> > ---------------|
> > |------------>
> > | Date:      |
> > |------------>
> >
> > >-----------------------------------------------------------------
> > ------------------------------------------------------------------
> > ---------------|
> >   |08/21/2008 06:21 PM
> >
> >                  |
> >
> > >-----------------------------------------------------------------
> > ------------------------------------------------------------------
> > ---------------|
> > |------------>
> > | Subject:   |
> > |------------>
> >
> > >-----------------------------------------------------------------
> > ------------------------------------------------------------------
> > ---------------|
> >   |[PCB_FORUM] Re: Is there any way to replace more than one via,
> > but not all of them?
> >                  |
> >
> > >-----------------------------------------------------------------
> > ------------------------------------------------------------------
> > ---------------|
> >
> >
> >
> >
> >
> > Hi Dave,
> >
> > Thanks!  Now...where can I find that piece of skill code?
> >
> > Regards,
> >
> > Austin
> >
> > > -----Original Message-----
> > > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Dave Seymour
> > > Sent: Thursday, August 21, 2008 6:24 PM
> > > To: icu-pcb-forum@xxxxxxxxxxxxx
> > > Subject: [PCB_FORUM] Re: Is there any way to replace more
> than one via,
> > > but not all of them?
> > >
> > >
> > > Austin,
> > >
> > > There is a piece of skill code available:
> > >
> > > replace_update_via.il
> > >
> > > Which will replace vias by window.
> > >
> > > Dave
> > >
> > >
> > > Dave Seymour
> > > Ixia
> > > 919.267.4840
> > >
> > > -----Original Message-----
> > > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin
> Franklin
> > > Sent: Thursday, August 21, 2008 6:20 PM
> > > To: icu-pcb-forum@xxxxxxxxxxxxx
> > > Subject: [PCB_FORUM] Is there any way to replace more than
> one via, but
> > > not all of them?
> > >
> > > Hi,
> > >
> > > I want to replace more than one and less than all vias.  In
> > > tools/replace, if I use padstack replace, I can select a via,
> and there
> > > is a checkbox for single instance, or if not checked, it replaces them
> > > all.  When in single instance mode, I can't do multiple
> selections (not
> > > surprising, after all, it is called "single instance").  Is
> there a way
> > > to use the selection box to select a group of vias, or some other way
> of
> > > selecting multiple vias and changing them to a different via padstack?
> > >
> > > 15.7.
> > >
> > > ..and I've gotten bitten by not checking single instance mode, and it
> > > changes all the instances of that via...and there is no undo!  So, I
> > > have learned to save often when replacing vias...
> > >
> > > Regards,
> > >
> > > Austin
> > >
> > > -----------------------------------------------------------
> > > To subscribe/unsubscribe:
> > > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > > with a subject of subscribe or unsubscribe
> > >
> > > To view the archives of this list go to
> > > http://www.freelists.org/archives/icu-pcb-forum/
> > >
> > > Problems or Questions:
> > > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > > -----------------------------------------------------------
> > > -----------------------------------------------------------
> > > To subscribe/unsubscribe:
> > > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > > with a subject of subscribe or unsubscribe
> > >
> > > To view the archives of this list go to
> > http://www.freelists.org/archives/icu-pcb-forum/
> >
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > -----------------------------------------------------------
> >
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list go to
> > http://www.freelists.org/archives/icu-pcb-forum/
> >
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > -----------------------------------------------------------
> >
> >
> > NOTICE
> > If you are not the intended recipient, please contact the sender
> > by reply e-mail and destroy the original message and any copy of
> > the message as well as any attachment to the original message.
> > This e-mail message and any attachment are for the sole use of
> > the intended recipients and may contain proprietary and/or
> > confidential information which may be privileged or otherwise
> > protected from disclosure. Any unauthorized review, use,
> > disclosure or distribution is prohibited without prior
> > authorization by HISPANO-SUIZA CANADA. An e-mail response to this
> > address may be subject to interception or monitoring for
> > operational reasons or for lawful business practices.
> > HISPANO-SUIZA CANADA shall not therefore be liable in any way for
> > the message if modified, altered or falsified.
> >
> > HISPANO-SUIZA CANADA
> > www.Hispano-Suiza.ca
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
>
> NOTICE
> If you are not the intended recipient, please contact the sender
> by reply e-mail and destroy the original message and any copy of
> the message as well as any attachment to the original message.
> This e-mail message and any attachment are for the sole use of
> the intended recipients and may contain proprietary and/or
> confidential information which may be privileged or otherwise
> protected from disclosure. Any unauthorized review, use,
> disclosure or distribution is prohibited without prior
> authorization by HISPANO-SUIZA CANADA. An e-mail response to this
> address may be subject to interception or monitoring for
> operational reasons or for lawful business practices.
> HISPANO-SUIZA CANADA shall not therefore be liable in any way for
> the message if modified, altered or falsified.
>
> HISPANO-SUIZA CANADA
> www.Hispano-Suiza.ca
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: