[PCB_FORUM] Re: Is there a way to step and repeat placement for identical circuits on the same PCB?

Hi Jean-Charles,

> - As you say, routing can be copied. Symbols can be also copied.

Well, I can copy the routing...but I get DRC errors when I drop it on the
other components "top line to SMD pin spacing".  The two components I am
copying the routing from/to are on the same grid.  If I route directly from
the pins of the 2nd component, the routing is fine.  What seems to be
happening, is the clines aren't taking on the net names that the pins are
assigned to.  What am I doing wrong?  I know I've done this before with no
problem.  I'm using 15.7.

Regards,

Austin
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: