[PCB_FORUM] Re: Is there a way to step and repeat placement for identical circuits on the same PCB?

Cadence does not offer this feature but there is 3rd party software that makes 
this possible. The design service I work at could do this service for you in 
your allegro database. If you have a circuit placed and routed it could be 
replicated as many times as you need. Contact me for more information. We could 
turn this around for you in the same day.

Thanks

Tony
  ----- Original Message ----- 
  From: Austin Franklin<mailto:allegrolist@xxxxxxxxxxxx> 
  To: icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx> 
  Sent: Saturday, May 23, 2009 8:31 PM
  Subject: [PCB_FORUM] Is there a way to step and repeat placement for 
identical circuits on the same PCB?


  Hi,

  I have four identical circuits on one PCB.  I want to place (and route) one,
  and have that placement and routing replicated for the other three identical
  circuits.  Is there a way to setup a placement "template" or a way to
  replicate the placement?  I know the routing can just be copied.

  Thanks,

  Austin
  -----------------------------------------------------------
  To subscribe/unsubscribe: 
  Send a message to 
icu-pcb-forum-request@xxxxxxxxxxxxx<mailto:icu-pcb-forum-request@xxxxxxxxxxxxx>
  with a subject of subscribe or unsubscribe

  To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/<http://www.freelists.org/archives/icu-pcb-forum/>

  Problems or Questions:
  Send an email to 
icu-pcb-forum-admins@xxxxxxxxxxxxx<mailto:icu-pcb-forum-admins@xxxxxxxxxxxxx>
  -----------------------------------------------------------

Other related posts: