[PCB_FORUM] Re: Is it possible to down rev from version 15-->14-->13?

Hi Seiji

 

You can't go down a version once is saved using the higher version.

 you will need To keep it at version 13.6.

 

I can't think of another way to do it

 

Good luck

 

Soledad Attia

 

  _____  

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu seiji
Sent: Wednesday, February 07, 2007 8:51 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Is it possible to down rev from version
15-->14-->13?

 

Hi all,

 

It seems like I can't stop running into trouble these days :)  

 

Lets say I have a customer using Version 13.6 and we no longer have it
installed.  I currently have access to Version 14 and 15.  Is it
possible to use one of these versions and down rev the data down back to
13.6 after we are done with routing.  We need to keep it at 13.6 for
customer purpose.  I thought about just importing and exporting
subdrawing but I remember it having some issues in the past and it is a
pretty dense board so I'm afraid I might miss something.

 

If anyone have any idea/suggestions please let me know.

 

Thank you,

Seiji

----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: