[PCB_FORUM] Re: Importing PADS logic netlist into Allegro boards?

As far as I know that's only work if you have PADS asci out to Allegro. In
your case you have only
asci of schematic. You need first to bring it to PADS and then out put it
out.



Shahed

|------------>
| From:      |
|------------>
  
>--------------------------------------------------------------------------------------------------------------------------------------------------|
  |"jwages" <jwages@xxxxxxxxx>                                                  
                                                                     |
  
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| To:        |
|------------>
  
>--------------------------------------------------------------------------------------------------------------------------------------------------|
  |<icu-pcb-forum@xxxxxxxxxxxxx>                                                
                                                                     |
  
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| Date:      |
|------------>
  
>--------------------------------------------------------------------------------------------------------------------------------------------------|
  |07/10/2009 06:07 PM                                                          
                                                                     |
  
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| Subject:   |
|------------>
  
>--------------------------------------------------------------------------------------------------------------------------------------------------|
  |[PCB_FORUM] Re: Importing PADS logic netlist into Allegro boards?            
                                                                     |
  
>--------------------------------------------------------------------------------------------------------------------------------------------------|





Thanx Austin,


Luckily, this will be a brand new Allegro database, so I won’t have to
transpose any existing layout data.


Can you tell me the file name extensions exported from PADS Logic? For
example, .dat, tel, etc…  or does it even matter?


Thanx in advance. Apparently, not many folks do this sort of input, cuz
you’re the only one that responded.


Once again, thank you.


Also,





Jim S. Wages


SR PCB Layout Designer


H) 919-237-3915 C) 919-484-2963





From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [
mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Friday, July 10, 2009 4:21 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Importing PADS logic netlist into Allegro boards?





Hi Jim,





Allegro can import PADS ASCII files.  It comes in pretty well.  I did a few
boards last year using this.  Shapes had to be redone, and some other
stuff...but it really was pretty good.





Best Regards,





Austin
 -----Original Message-----
 From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [
 mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of jwages
 Sent: Friday, July 10, 2009 12:24 PM
 To: icu-pcb-forum@xxxxxxxxxxxxx
 Subject: [PCB_FORUM] Importing PADS logic netlist into Allegro boards?


 Has anyone had experience importing a PADS logic schematic netlist into
 Allegro? I have a potential ( and very much needed) new customer that
 would have some steady work for me if I can do this.


 Would really appreciate any help or advice.





 Jim S. Wages


 SR PCB Layout Designer


 H) 919-237-3915 C) 919-484-2963

Other related posts: