[PCB_FORUM] Re: Importing Dx-Designer Netlist to Allegro15.7

Thank you for reply Nagaraj... 

I will check it out...

 

Bye

Suresh

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Shanmugam, Nagaraj
Sent: Monday, September 15, 2008 5:23 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Importing Dx-Designer Netlist to Allegro15.7 

 

Check 

1)     for Device file path under menu setupàuserpreferenceàconfigpath - 
devpath. Also be sure that your environment path points to the proper 
directories for padstack files (PADPATH), nd symbol files (PSMPATH) so that the 
tool can access the correct padstacks, devices, and package symbols.

2)     Use DEV_CHECK command to see if device file has any errors.

3)     Go though the C:/Cadence/SPB_15.7/doc/algrologic/algrologic.pdf 

 

Good Luck,

Nagaraj.

 

 

 

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Suresh Kumar (Aero 
Space Engineering)
Sent: Monday, September 15, 2008 3:43 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Importing Dx-Designer Netlist to Allegro15.7 

 

Hi Folks,

 

I am got  hold  while importing third party Netlist to Allegro15.7

Here the third party is Dx-Designer...

 

This would be great if someone can refresh my memory ...

 

Thanks in advance

 

 

Bye

Suresh

 

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of felix felix
Sent: Monday, September 15, 2008 8:52 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] not able to access .il file < Logomaker.il>

 

 

Hi Dave

Good evening :)
I am not able to access the .il attachment. Can you please send it as a zip 
file?
I am using 15.5 & 15.7 version
Thanks

Regards
Felix

 

----- Original Message ----
From: "dave.elder@xxxxxxxxxx" <dave.elder@xxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Friday, September 12, 2008 11:30:34 PM
Subject: [PCB_FORUM] Re: REgarding Skill file< Logomaker.il>

Hi Felix,

A quick look at my code doesn't give me any idea why you would get that error 
message.

I did the development in 16.01. It is possible that it behaves differently in 
other versions.

I have attached the current version of the logoMaker code. It is possible that 
this will work where your current code will not.

Cheers, Dave

----- Original Message -----

From: felix felix <felix_life@xxxxxxxxx> 

Date: Friday, September 12, 2008 3:36 pm 

Subject: [PCB_FORUM] REgarding Skill file< Logomaker.il> 

> Hi Dave 
> 
> 
> Using skill logomaker.il 
> I am not able to place logo in layout. 
> error is "E- *Error* eval: unbound variable - mark" 
> But i am able to place  in symbol editor. 
> Please help me. Think problem in skill??? 
> 
> Thanks 
> FelixHi Dave, 
> 
> 
>      

________________________________


This email, including any attachments, is only for the intended addressee. It 
is subject to copyright, confidential and may be the subject of legal or other 
privilege, none of which is waived or lost by reason of this transmission. If 
the receiver is not the intended addressee, please accept our apologies, notify 
us by return, delete all copies and perform no other act on the email. 
Unfortunately, we cannot warrant that the email has not been altered or 
corrupted during transmission. 

________________________________

----------------------------------------------------------- To 
subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe To view the archives of this list go 
to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send 
an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
----------------------------------------------------------- 

 

 

DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended 
for the named recipient(s) only. 
It shall not attach any liability on the originator or HCL or its affiliates. 
Any views or opinions presented in 
this email are solely those of the author and may not necessarily reflect the 
opinions of HCL or its affiliates. 
Any form of reproduction, dissemination, copying, disclosure, modification, 
distribution and / or publication of 
this message without the prior written consent of the author of this e-mail is 
strictly prohibited. If you have 
received this email in error please delete it and notify the sender 
immediately. Before opening any mail and 
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------

Other related posts: