[PCB_FORUM] Re: Importing Dx-Designer Netlist to Allegro15.7

Check 

1)       for Device file path under menu
setup-->userpreference-->configpath - devpath. Also be sure that your
environment path points to the proper directories for padstack files
(PADPATH), nd symbol files (PSMPATH) so that the tool can access the
correct padstacks, devices, and package symbols.

2)       Use DEV_CHECK command to see if device file has any errors.

3)       Go though the C:/Cadence/SPB_15.7/doc/algrologic/algrologic.pdf


 

Good Luck,

Nagaraj.

 

 

 

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Suresh Kumar
(Aero Space Engineering)
Sent: Monday, September 15, 2008 3:43 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Importing Dx-Designer Netlist to Allegro15.7 

 

Hi Folks,

 

I am got  hold  while importing third party Netlist to Allegro15.7

Here the third party is Dx-Designer...

 

This would be great if someone can refresh my memory ...

 

Thanks in advance

 

 

Bye

Suresh

 

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of felix felix
Sent: Monday, September 15, 2008 8:52 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] not able to access .il file < Logomaker.il>

 

 

Hi Dave

Good evening :)
I am not able to access the .il attachment. Can you please send it as a
zip file?
I am using 15.5 & 15.7 version
Thanks

Regards
Felix

 

----- Original Message ----
From: "dave.elder@xxxxxxxxxx" <dave.elder@xxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Friday, September 12, 2008 11:30:34 PM
Subject: [PCB_FORUM] Re: REgarding Skill file< Logomaker.il>

Hi Felix,

A quick look at my code doesn't give me any idea why you would get that
error message.

I did the development in 16.01. It is possible that it behaves
differently in other versions.

I have attached the current version of the logoMaker code. It is
possible that this will work where your current code will not.

Cheers, Dave

----- Original Message -----

From: felix felix <felix_life@xxxxxxxxx> 

Date: Friday, September 12, 2008 3:36 pm 

Subject: [PCB_FORUM] REgarding Skill file< Logomaker.il> 

> Hi Dave 
> 
> 
> Using skill logomaker.il 
> I am not able to place logo in layout. 
> error is "E- *Error* eval: unbound variable - mark" 
> But i am able to place  in symbol editor. 
> Please help me. Think problem in skill??? 
> 
> Thanks 
> FelixHi Dave, 
> 
> 
>      

________________________________


This email, including any attachments, is only for the intended
addressee. It is subject to copyright, confidential and may be the
subject of legal or other privilege, none of which is waived or lost by
reason of this transmission. If the receiver is not the intended
addressee, please accept our apologies, notify us by return, delete all
copies and perform no other act on the email. Unfortunately, we cannot
warrant that the email has not been altered or corrupted during
transmission. 

________________________________

----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
----------------------------------------------------------- 

 

 

DISCLAIMER:
------------------------------------------------------------------------
-----------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and
intended for the named recipient(s) only. 
It shall not attach any liability on the originator or HCL or its
affiliates. Any views or opinions presented in 
this email are solely those of the author and may not necessarily
reflect the opinions of HCL or its affiliates. 
Any form of reproduction, dissemination, copying, disclosure,
modification, distribution and / or publication of 
this message without the prior written consent of the author of this
e-mail is strictly prohibited. If you have 
received this email in error please delete it and notify the sender
immediately. Before opening any mail and 
attachments please check them for viruses and defect.
------------------------------------------------------------------------
-----------------------------------------------

Other related posts: