[PCB_FORUM] Re: Import *.drl

Mike,

Thanks, that worked.

Your depth of knowledge is amazing.

dave


Michael Catrambone wrote:


Hey Dave,

The command is explot.   It will convert a .drl ncdrill tape file to a
Cadence .plt file which then can be loaded into Allegro.

Sincerely,
Michael Catrambone
UTStarcom, Inc.
Chairman
Cadence Designer Network
CDNLive! Worldwide Web Site: http://www.cdnlive.com
Cadence User Community Web Site:  http://www.cdnusers.org

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
Sent: Wednesday, April 18, 2007 3:59 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Import *.drl

Has anyone tried to import a *.drl( nctape output)  file back into
Allegro?

I can't remember how to import it.

dave



--
Dave Seymour, CID+
Catapult Communications Inc.
800 Perimeter Park Dr, Suite A
Morrisville, NC 27560

Direct: (919)653-4249
Main: (919)653-4180
Fax: (919)653-4297

Dave.seymour@xxxxxxxxxxxx


-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: