[PCB_FORUM] Re: IDF file??

Eileen:

--- Eileen Ong <eileen.ong@xxxxxxxxxxxxxx> wrote:

> Hi all,
> 
> I'm trying to generate a 3D file (with component
> height) for the Mechanical
> to verify.
> 
>  
> 
> 1) Is this function export IDF? If not IDF then what
> file format should I
> generate for them.

Yes, use export IDF
> 
> 2) I have generated an IDF file and send to
> Mechanical, but they claim that
> they can't read in the file. They are using ProE.
> Can some one pls advise?

Make sure you use the PTC option for ProE
> 
> 3) I have received the Brd file from customer, from
> layout, how do I check
> the height of the component on board? (by
> attributes). 

You must turn the package bound subclass on,
then info the shape.  The height info
should show up if it has been added to the symbol.
> 
> 4) Is there a way to generate a report on the
> component height?

You could create an extract file to get that
information
> 
>  
> 
> Best regards,
> Eileen
> 
>  
Thanks,
Les Wong
> 
> 

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: