[PCB_FORUM] Re: How to slow down mmb panning

Les, 
 
If it is not related to the Allegro setup then maybe it is simply a
mouse setting. Have you tried changing the sensitivity of the mouse?
This can be done through the control panel / Mouse Properties.
 
Thanks
Tony

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Les Wong
Sent: Wednesday, January 16, 2008 11:39 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to slow down mmb panning


Tony:
Thanks, we tried that.
But he still has a problem comtrolling the roam (pan)
Les

"Cosentino, Tony" <Tony.Cosentino@xxxxxxxxxxx> wrote: 

        Les,
         
        You can try going into Setup / User Preferences / Roam. Use
setting "pcb_autoroam". The best results I get is when I leave the field
blank.
         
        Thanks
        Tony Cosentino
         
________________________________

        From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Les Wong
        Sent: Wednesday, January 16, 2008 10:14 AM
        To: icu-pcb-forum@xxxxxxxxxxxxx
        Subject: [PCB_FORUM] Re: How to slow down mmb panning
        
        
        Hi All:
        
        We are starting to use Allegro 16.1
        We have a couple of users that when they pan with the mmb,
        the image moves too fast to pan to a specific area.
        Does any one know how to control this panning speed ?
        
        Thanks,
        Les

Other related posts: