[PCB_FORUM] Re: How to pass BOM_IGNORE property from Concept to Allegro?

Mark,

So could it just be a write permission thing?  Here the DE puts the
required property to not populate a comp on the schematic symbol, then
the BOM is generated from the schematics.  The comp wants a physical
symbol on the PCB in case a different version of the BOM will populate
the comp.  Therefore it doesn't matter to me (or Allegro) which comps
may have the no populate property.

Good luck with it!
 
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices
Longmont, Colorado

amd.com
gary.macindoe@xxxxxxx

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg
Sent: Monday, November 20, 2006 11:54 AM
To: Cadence User Group
Subject: [PCB_FORUM] How to pass BOM_IGNORE property from Concept to
Allegro?

Can anyone tell me how to export BOM_IGNORE property (we use for not 
populated comps).
This is defined in Concept, but does not come over to Allegro.

I tried packager utilities / Export Packager Files / Advanced / Property

Flow Setup then selected "transfer" for BOM_IGNORE property.

I get a massage "Cannot write file pxlBA.txt" in my physical directory.
Continue? I selected yes, but the property still does not show up in 
Allegro.

Thanks,
Mark


________________________________________________________________________
_____
Scanned by IBM Email Security Management Services powered by
MessageLabs. For more information please visit http://www.ers.ibm.com
________________________________________________________________________
_____
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------




-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: